Basic settings
en
39
To access the basic settings:
The hob must be off.
1.
Switch on the hob.
2.
Within ten seconds, touch and hold the
t
symbol for
approximately four seconds.
The first four displays provide product information.
Touch the settings area to view the individual
displays.
3.
Touching the
t
symbol again takes you to the basic
settings.
™‚
and
‹
light up as a preset in the displays.
4.
Touch the
t
symbol repeatedly until the required
function is displayed.
™‚„
Configuring activation of the flexible cooking zone
‹
As two independent hotplates.*
‚
As a single hotplate.
™‚…
Connecting the wireless temperature sensor to the hob
‹
Connected correctly
‚
Not connected correctly: Transmission error.
ƒ
Not connected correctly: Temperature sensor fault.
™‚ˆ
Setting air recirculation mode or air extraction mode
‹
Air recirculation mode has been set.*
‚
Air extraction mode has been set.
™‚‰
Setting automatic start
‹
Switched off.
‚
Switched on: Automatic mode with sensor control*
ƒ
Switched on: The ventilation system starts at a fixed fan setting.
™‚Š
Setting the sensor sensitivity for the ventilation system
‚
Lowest sensor sensitivity setting.
ƒ
Medium sensor sensitivity setting.*
„
Highest sensor sensitivity setting.
™ƒ‹
Setting the run-on
‹
Switched off.
‚
Switched on: Automatic function with sensor-controlled run-on.
ƒ
Switched on: The ventilation system runs in air extraction mode for approx. 6 minutes and in air recirculation mode for approx.
30 minutes at fan setting
‚
and automatically switches off once this time has elapsed.*
™‹
Restoring the factory settings
‹
Individual settings.*
‚
Restoring the factory settings.
Display
Function
* Factory settings
Product information
Display screen
After-sales service index (ASSI)
‹‚
Production number
”š
Production number 1
Š†
.
Production number 2
‹
.
†