Bosch PVA-4R24, Operation Manual, Page: 10 / 34

Number Symbol Element Description
3 Recessed button The button is protected to prevent it from being
pressed accidentally. Use a pointed object (such
as a ballpoint pen) to press the button.
This button has the following functions if the CAN
address of the device is not set to 00:
–
Find function: If the find function of the
device is activated, press this button to
deactivate the indicators.
– Displaying the CAN baud rate: Press this
button for at least one second. Please refer to
section Displaying the CAN baud rate, page
25.
– LED test: Press this button for at least three
seconds to activate the LED test. All
indicators at the front panel light up as long
as the button is pressed.
This button has the following functions if the CAN
address of the device is set to 00:
–
Resetting a fault (e.g. watchdog fault): Press
the button briefly to confirm a fault.
– Setting/displaying the CAN baud rate: Press
this button for at least one second. Please
refer to section Configuring the CAN baud rate,
page 25.
– Resetting to delivery condition: Press this
button for at least three seconds. Please refer
to section Resetting to factory default settings,
page 29.
4 Network indicator
light This indicator lights up green if successful data
communication has been established.
5 Standby indicator
light This indicator lights up green when the device is in
standby mode.
6 Power indicator
light This indicator lights up green when the power
supply is OK.
10 en | System overview PAVIRO Router
12-May-2015 | 03 | F01U306901 Operation manual