English–3
1 609 929 984 • (04.03) T
Fill the unit with tap water only.
Never mix combustible, poisonous, caustic or
other liquids (e.g. cleaning agent) with the filling.
Filling with Water
☞
When filling, take care that the grid over the
rubber surge protector 3 is not pressed in by
the filling container.
Refilling with Water
Take care when loosening the
tank cap.
Danger of scalding!
Procedure:
Switch off the unit.
Pull the mains plug.
Wait
at least
one minute.
Only then open the tank:
–
Turn the tank cap lightly counter clockwise to the
first stop (position
2.
).
–
Allow steam to escape
until no more steam is
emitted.
Press down tank cap.
–
Continue to turn counter clockwise to position
3.
and remove.
Fill with water to the
maximum
marking
on the water level indi-
cator
2
. If the unit is filled with
warm water, the heating time is
shortened.
Close the tank securely after filling:
Place on the tank cap (position
3.
), press down and
tighten clockwise to the stop.
A correctly close tank cap is shown in the following il-
lustration position
1.
).
When working for longer periods:
Pay attention to the
minimum marking
on the water
level indicator
2
and refill with water in time.
Filling or Refilling with Water
3
Summary of Contents for PTL 1
Page 2: ......
Page 3: ...1 2 3 4 5 6 7 8 9 ...
