English |
11
Bosch Power Tools
1 609 92A 2AK | (18.2.16)
Delivery Scope
Combination cordless drill.
Battery, application tools and other accessories shown or de-
scribed are not part of the standard delivery scope.
A complete overview of accessories can be found in our ac-
cessories program.
Intended Use
The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramic and plastic and
for impact drilling in brick, brickwork and masonry.
The light of this power tool is intended to illuminate the power
tool’s direct area of working operation and is not suitable for
household room illumination.
Technical Data
The technical data of the machine are listed in the table on
page 149.
Noise/Vibration Information
The measured values of the machine are listed in the table on
page 149.
Sound emission values determined according to
EN 60745-2-1, EN 60745-2-2.
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745-2-1, EN 60745-2-2.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Mounting and Operation
Brickwork
Metal
Wood
Ø
Drilling diameter, max.
Ø
Max. screw dia.
Chuck clamping range
Weight according to EPTA-Procedure
01:2014
L
wA
Sound power level
L
pA
Sound pressure level
K
Uncertainty
a
h
Vibration total value
T
1
Permitted ambient temperature during
charging
T
2
Permitted ambient temperature during
operation* and storage
(* Limited performance at temperatures
<0 °C)
Recommended batteries
Recommended chargers
Symbol
Meaning
Action
Figure
Page
Removing the battery
1
150
Inserting the battery
2
150
Mounting application tools
3
150
Reversing the rotational direction
4
151
Setting the torque
5
151
Setting the operating mode
6
152
Gear selection, mechanical
7
152
Switching On and Off
8
153
Checking the battery charge condition
9
153
Selecting Accessories
–
154
OBJ_BUCH-2806-001.book Page 11 Thursday, February 18, 2016 12:10 PM
