English |
13
Bosch Power Tools
1 609 92A 0RG | (12.2.15)
Product Description and
Specifications
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for sawing wood, plastic, metal and
building materials while resting firmly on the workpiece. It is
suitable for straight and curved cuts. When using the appro-
priate bimetal saw blades, it is possible to cut flush to the
workpiece surface. The saw blade recommendations must be
observed.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1
Saw blade*
2
Base plate
3
Saw blade holder
4
SDS clamping lever for saw blade release
5
Rotary switch for orbital action
6
On/Off switch
7
Lock-off button for On/Off switch
8
Battery pack*
9
Handle (insulated gripping surface)
10
Clamping plate
11
Battery unlocking button
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-11.
Typically the A-weighted noise levels of the product are:
Sound pressure level 85 dB(A); Sound power level 96 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745:
Cutting board: a
h
=17.5 m/s
2
, K=1.5 m/s
2
,
Cutting wooden beam: a
h
=17.5 m/s
2
, K=1.5 m/s
2
.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may signif-
icantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the acces-
sories, keep the hands warm, organisation of work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with all rele-
vant provisions of the directives 2011/65/EU, until
19 April 2016: 2004/108/EC, from 20 April 2016 on:
2014/30/EU, 2006/42/EC including their amendments and
complies with the following standards: EN 60745-1,
EN 60745-2-11.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 03.02.2015
Sabre saw
PSA 18 LI
Article number
3 603 CB2 3..
Rated voltage
V=
18
Stroke rate at no load n
0
min
-1
0–2800
Tool holder
SDS
Stroke rate control
Stroke
mm
22
Cutting depth, max.
– in wood
– in non-alloy steel
– Pipe diameter
mm
mm
mm
100
20
20
Weight according to
EPTA-Procedure 01/2003
kg
2.3
Permitted ambient temperature
– during charging
– during operation* and during
storage
°C
°C
0...+45
–20...+50
* Limited performance at temperatures <0 °C
Technical data determined with battery from delivery scope.
Recommended batteries
PBA 18V...V
PBA 18V...W
Recommended chargers
AL 22.. CV
AL 18.. CV
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Sabre saw
PSA 18 LI
* Limited performance at temperatures <0 °C
Technical data determined with battery from delivery scope.
OBJ_BUCH-1848-002.book Page 13 Thursday, February 12, 2015 10:17 AM
