Bosch PS22 Operating/Safety Instructions Manual Download Page 44

© Robert Bosch Tool Corporation 1800 W. Central Road Mt. Prospect, IL 60056-2230

Exportado por: Robert Bosch Tool Corporation Mt. Prospect, IL 60056-2230, E.U.A.

Importado en México por: Robert Bosch, S.A. de C.V., Calle

Robert Bosch No. 405, Zona Industrial, Toluca, Edo. de

México, C.P. 50070, Tel. (722) 2792300

LIMITED WARRANTY OF BOSCH PORTABLE AND BENCHTOP POWER TOOLS

Robert Bosch Tool Corporation (“Seller”) warrants to the original purchaser only, that all BOSCH portable and benchtop power tools will be free from defects in
material or workmanship for a period of one year from date of purchase. SELLER’S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited
Warranty and, to the extent permitted by law, any warranty or condition implied by law, shall be the repair or replacement of parts, without charge, which are
defective in material or workmanship and which have not been misused, carelessly handled, or misrepaired by persons other than Seller or Authorized Service
Station. To make a claim under this Limited Warranty, you must return the complete portable or benchtop power tool product, transportation prepaid, to any
BOSCH Factory Service Center or Authorized Service Station.  For Authorized BOSCH Power Tool Service Stations, please refer to your phone directory.

THIS  LIMITED  WARRANTY  DOES  NOT  APPLY  TO  ACCESSORY  ITEMS  SUCH  AS  CIRCULAR  SAW  BLADES,  DRILL  BITS,  ROUTER  BITS,  JIGSAW  BLADES,
SANDING BELTS, GRINDING WHEELS AND OTHER RELATED ITEMS.

ANY IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE YEAR FROM DATE OF PURCHASE. SOME STATES IN THE U.S., SOME CANADIAN PRO V -
INCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF
PROFITS)  ARISING FROM THE SALE OR USE OF THIS PRODUCT. SOME STATES IN THE U.S.  AND  SOME  CANADIAN  PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE IN THE
U.S., PROVINCE TO PROVINCE IN CANADA AND FROM COUNTRY TO COUNTRY.

THIS LIMITED WARRANTY APPLIES ONLY TO PORTABLE AND BENCHTOP ELECTRIC TOOLS SOLD WITHIN THE UNITED STATES OF AMERICA, CANADA AND
THE  COMMONWEALTH  OF  PUERTO  RICO.    FOR  WARRANTY  COVERAGE  WITHIN  OTHER  COUNTRIES,  CONTACT  YOUR  LOCAL  BOSCH  DEALER  OR
IMPORTER.

GARANTIE LIMITÉE DES OUTILS ÉLECTRIQUES PORTATIFS ET D'ÉTABLI BOSCH

Robert  Bosch  Tool  Corporation  (le  «  vendeur  »)  garantit  à  l'acheteur  initial  seulement  que  tous  les  outils  électriques  portatifs  et  d'établi  BOSCH  seront
exempts  de  vices  de  matériaux  ou  d'exécution  pendant  une  période  d'un  an  depuis  la  date  d'achat. LA  SEULE  OBLIGATION  DU  VENDEUR  ET  LE  SEUL
RECOURS DE L’ACHETEUR sous la présente garantie limitée, et en autant que la loi le permette sous toute garantie ou condition implicite qui en découlerait,
sera  l’obligation  de  remplacer  ou  réparer  gratuitement  les  pièces  défectueuses  matériellement  ou  comme  fabrication,  pourvu  que  lesdites  défectuosités  ne
soient pas attribuables à un usage abusif ou à quelque réparation bricolée par quelqu’un d’autre que le vendeur ou le personnel d’une station-service agréée.
Pour présenter une réclamation en vertu de cette garantie limitée, vous devez renvoyer l'outil électrique portatif ou d'établi complet, port payé, à tout centre
de service agréé ou centre de service usine.  Veuillez consulter votre annuaire téléphonique pour les adresses.

LA  PRÉSENTE  GARANTIE  NE  S’APPLIQUE  PAS  AUX  ACCESSOIRES  TELS  QUE  LAMES  DE  SCIES  CIRCULAIRES,  MÈCHES  DE  PERCEUSES,  FERS  DE
TOUPIES, LAMES DE SCIES SAUTEUSES, COURROIES DE PONÇAGE, MEULES ET AUTRES ARTICLES DU GENRE.

TOUTE  GARANTIE  IMPLICITE  SERA  LIMITÉE  COMME  DURÉE  À  UN  AN  À  COMPTER  DE  LA  DATE  D’ACHAT.  CERTAINS  ÉTATS  AMÉRICAINS,  CERTAINES
PROVINCES CANADIENNES N’ADMETTANT PAS LE PRINCIPE DE LA LIMITATION DE LA DURÉE DES GARANTIES IMPLICITES, IL EST POSSIBLE QUE LES
LIMITATIONS CI-DESSUS NE S’APPLIQUENT PAS À VOTRE CAS.

EN  AUCUN  CAS  LE  VENDEUR  NE  SAURAIT  ÊTRE  TENU  POUR  RESPONSABLE  DES  INCIDENTS  OU  DOMMAGES  INDIRECTS  (INCLUANT,  MAIS  NE  SE
LIMITANT  PAS  AUX  PERTES  DE  PROFITS)  CONSÉCUTIFS  À  LA  VENTE  OU  L’USAGE  DE  CE  PRODUIT.  CERTAINS  ÉTATS  AMÉRICAINS  ET  CERTAINES
PROVINCES CANADIENNES N’ADMETTANT PAS LE PRINCIPE DE LA LIMITATION NI L’EXCLUSION DES DOMMAGES INDIRECTS ET CONSÉQUENTIELS, IL
EST POSSIBLE QUE LES LIMITATIONS OU EXCLUSIONS CI-DESSUS NE S’APPLIQUENT PAS À VOTRE CAS.

LA  PRÉSENTE  GARANTIE  VOUS  ACCORDE  DES  DROITS  BIEN  DÉTERMINÉS,  Y  COMPRIS  POSSIBLEMENT  CERTAINS  DROITS  VARIABLES  DANS  LES
DIFFÉRENTS ÉTATS AMÉRICAINS, PROVINCES CANADIENNE ET DE PAYS À PAYS.

CETTE GARANTIE LIMITÉE NE S'APPLIQUE QU'AUX OUTILS ÉLECTRIQUES PORTATIFS ET D'ÉTABLI VENDUS AUX ÉTATS-UNIS D'AMÉRIQUE, AU CANADA
ET  AU  COMMONWEALTH  DE  PORTO  RICO.  POUR  COUVERTURE  DE  GARANTIE  DANS  LES  AUTRES  PAYS,  CONTACTEZ  VOTRE  IMPORTATEUR  OU
REVENDEUR BOSCH LOCAL.

GARANTIA LIMITADA PARA HERRAMIENTAS MECANICAS PORTATILES Y PARA TABLERO DE BANCO BOSCH

Robert Bosch Tool Corporation ("el Vendedor") garantiza, únicamente al comprador original, que todas las herramientas mecánicas portátiles y para tablero
de banco BOSCH estarán libres de defectos de material o de fabricación durante un período de un año a partir de la fecha de compra. LA UNICA OBLIGACION
DEL  VENDEDOR  Y  EL  RECURSO  EXCLUSIVO  QUE  USTED  TIENE  bajo  esta  Garantía  Limitada  y,  hasta  donde  la  ley  lo  permita,  bajo  cualquier  garantía  o
condición  implícita  por  ley,  consistirá  en  la  reparación  o  sustitución  sin  costo  de  las  piezas  que  presenten  defectos  de  material  o  de  fabricación  y  que  no
hayan sido utilizadas inco rrectamente, manejadas descuidadamente o reparadas incorrectamente por personas que no sean el Vendedor o una Estación de
servicio  autorizada.  Para  efectuar  una  reclamación  bajo  esta  Garantía  Limitada,  usted  debe  devolver  el  producto,  que  consiste  en  la  herramienta  mecánica
portátil  o  para  tablero  de  banco  completa,  con  el  transporte  pagado,  a  cualquier  Centro  de  servicio  de  fábrica  o  Estación  de  servicio  autorizada.    Para
Estaciones de servicio autorizadas de herramientas mecánicas BOSCH, por favor, consulte el directorio telefónico.

ESTA GARANTIA LIMITADA NO SE APLICA A ARTICULOS ACCESORIOS TALES COMO HOJAS PARA SIERRAS CIRCULARES, BROCAS PARA TALADROS,
BROCAS PARA FRESADORAS, HOJAS PARA SIERRAS DE VAIVEN, CORREAS PARA LIJAR, RUEDAS DE AMOLAR Y OTROS ARTICULOS RELACIONADOS.

TODAS LAS GARANTIAS IMPLICITAS TENDRAN UNA DURACION LIMITADA A UN AÑO A PARTIR DE LA FECHA DE COMPRA. ALGUNOS ESTADOS DE LOS
EE.UU. Y ALGUNAS PROVINCIAS CANADIENSES NO PERMITEN LIMITACIONES EN CUANTO A LA DURACION DE UNA GARANTIA IMPLICITA, POR LO QUE
ES POSIBLE QUE LA LIMITACION ANTERIOR NO SEA APLICABLE EN EL CASO DE USTED.

EL  VENDEDOR  NO  SERA  RESPONSABLE  EN  NINGUN  CASO  DE  NINGUN  DAÑO  INCIDENTAL  O  EMERGENTE  (INCLUYENDO  PERO  NO  LIMITADO  A
RESPONSABILIDAD  POR  PERDIDA  DE  BENEFICIOS)  QUE  SE  PRODUZCA  COMO  CONSECUENCIA  DE  LA  VENTA  O  UTILIZACION  DE  ESTE  PRODUCTO.
ALGUNOS  ESTADOS  DE  LOS  EE.UU.  Y  ALGUNAS  PROVINCIAS  CANADIENSES  NO  PERMITEN  LA  EXCLUSION  O  LIMITACION  DE  LOS  DAÑOS
INCIDENTALES O EMERGENTES, POR LO QUE ES POSIBLE QUE LA LIMITACION O EXCLUSION ANTERIOR NO SEA APLICABLE EN EL CASO DE USTED.

ESTA GARANTIA LIMITADA LE CONFIERE A USTED DERECHOS LEGALES ESPECIFICOS Y ES POSIBLE QUE USTED TAMBIEN TENGA OTROS DERECHOS QUE
VARIAN DE ESTADO A ESTADO EN LOS EE.UU., DE PROVINCIA A PROVINCIA EN CANADA Y DE UN PAIS A OTRO.

ESTA  GARANTIA  LIMITADA  SE  APLICA  SOLAMENTE  A  HERRAMIENTAS  ELECTRICAS  PORTATILES  Y  PARA  TABLERO  DE  BANCO  VENDIDAS  EN  LOS
ESTADOS  UNIDOS  DE  AMERICA,  CANADA  Y  EL  ESTADO  LIBRE  ASOCIADO  DE  PUERTO  RICO.  PARA  COBERTURA  DE  GARANTIA  EN  OTROS  PAISES,
PONGASE EN CONTACTO CON SU DISTRIBUIDOR O IMPORTADOR LOCAL DE BOSCH.

2610051963   01/19                           

!2610051963!

2610051963.qxp_PS22 PS32  1/15/19  8:50 AM  Page 44

Summary of Contents for PS22













































Reviews: