16
| English
1 609 929 X93 | (10.2.11)
Bosch Power Tools
e) Do not overreach. Keep proper footing
and balance at all times.
This enables
better control of the power tool in unex-
pected situations.
f) Dress properly. Do not wear loose cloth-
ing or jewellery. Keep your hair, clothing
and gloves away from moving parts.
Loose clothes, jewellery or long hair can
be caught in moving parts.
g) If devices are provided for the connec-
tion of dust extraction and collection fa-
cilities, ensure these are connected and
properly used.
Use of dust collection can
reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the cor-
rect power tool for your application.
The
correct power tool will do the job better
and safer at the rate for which it was de-
signed.
b) Do not use the power tool if the switch
does not turn it on and off.
Any power
tool that cannot be controlled with the
switch is dangerous and must be re-
paired.
c) Disconnect the plug from the power
source and/or the battery pack from the
power tool before making any adjust-
ments, changing accessories, or storing
power tools.
Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfa-
miliar with the power tool or these in-
structions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for mis-
alignment or binding of moving parts,
breakage of parts and any other condi-
tion that may affect the power tool’s op-
eration. If damaged, have the power tool
repaired before use.
Many accidents are
caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Prop-
erly maintained cutting tools with sharp
cutting edges are less likely to bind and
are easier to control.
g) Use the power tool, accessories and tool
bits etc. in accordance with these in-
structions, taking into account the work-
ing conditions and the work to be per-
formed.
Use of the power tool for
operations different from those intended
could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qual-
ified repair person using only identical
replacement parts.
This will ensure that
the safety of the power tool is maintained.
Safety Warnings for Cut-off Grinder
f
Never stand on the power tool.
Serious inju-
ries could occur when the power tool tips
over or when accidentally coming into con-
tact with the cutting disc.
f
Always use the blade guard.
A blade guard
protects the user against broken off parts of
the cutting disc and against accidental
touching of the cutting disc.
f
Make sure that the guard operates properly
and that it can move freely.
Never lock the
guard in place when opened.
f
Use the power tool only for dry cutting.
Wa-
ter penetrating into a power tool increases
the risk of an electric shock.
f
Keep the mains cable away from rotating
application tools.
The mains cable can be
cut through or get caught.
f
Keep handles dry, clean, and free from oil
and grease.
Greasy, oily handles are slippery
causing loss of control.
f
Never remove cutting remainders, metal
chips, etc. from the cutting area while the
machine is running.
Always guide the tool
arm back to the neutral position first and
then switch the machine off.
OBJ_BUCH-1373-002.book Page 16 Thursday, February 10, 2011 10:32 AM