English |
13
Intended use
The power tool is intended for driving and loosening screws
and for drilling in wood, metal, ceramic and plastic.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Keyless chuck
(2)
Torque presetting ring
(3)
Gear selector switch
(4)
Battery release button
A)
(5)
Rechargeable battery
A)
(6)
Rotational direction switch
(7)
On/off switch
(8)
Battery charge indicator
(9)
"PowerLight" lamp
(10)
Handle (insulated gripping surface)
(11)
Universal bit holder
A)
(12)
Screwdriver bit
A)
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless Drill/Driver
GSR 12V-15
Article number
3 601 H68 1..
Rated voltage
V=
12
No-load speed
A)
– First gear
min
-1
0–400
– Second gear
min
-1
0–1300
Max. torque, hard/soft
screwdriving application ac-
cording to ISO 5393
A)
Nm
30/15
Max. drilling diameter
– Steel
mm
10
– Wood
mm
19
Max. screw diameter
mm
7
Chuck capacity
mm
1.0–10
Weight according to EPTA-
Procedure 01:2014
B)
kg
1.0–1.2
Recommended ambient tem-
perature during charging
°C
0 to +35
Permitted ambient temperat-
ure during operation
C)
and
during storage
°C
–20 to +50
Recommended rechargeable
batteries
GBA 12V...
Cordless Drill/Driver
GSR 12V-15
Recommended chargers
GAL 12...
GAX 18...
A) measured at 20–25 °C with battery
GBA 12V 1.3Ah
.
B) Depends on battery in use
C) Limited performance at temperatures <0 °C
Noise/vibration information
Noise emission values determined according to
EN 62841-2-1
.
Typically, the A-weighted sound pressure level of the power
tool is
71
dB(A). Uncertainty K=5 dB. The noise level when
working can exceed the volume stated.
Wear hearing pro-
tection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to
EN 62841-2-1
:
Drilling in metal: a
h
<2.5
m/s
2
, K =
1.5
m/s
2
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
u
Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage.
There is risk of injury
from unintentionally pressing the on/off switch.
Charging the Battery (see figure A)
u
Use only the chargers listed in the technical data.
Only
these chargers are matched to the lithium-ion battery of
your power tool.
Note:
The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
Bosch Power Tools
1 609 92A 4T2 | (19.05.2020)
Автотовары
«130»
130.com.ua
