English |
11
Hand-held circular saw
GKS 18V-68 GC
GKS 18V-68 C
Use with FSN guide rail system
●
–
Base plate dimensions
mm
206 x 346
177.5 x 329
Max. saw blade diameter
mm
190
190
Min. saw blade diameter
mm
184
184
Max. base blade thickness
mm
2.0
2.0
Min. base blade thickness
mm
1.0
1.0
Locating bore
mm
20
20
Weight according to EPTA-Procedure 01:2014
B)
kg
4.7–5.5
4.4–5.2
Recommended ambient temperature during char-
ging
°C
0 to +35
0 to +35
Permitted ambient temperature during opera-
tion
C)
and during storage
°C
–20 to +50
–20 to +50
Compatible rechargeable batteries
GBA 18V...
ProCORE18V...
GBA 18V...
ProCORE18V...
Recommended rechargeable batteries for max-
imum performance
ProCORE18V... ≥ 5.5 Ah
ProCORE18V... ≥ 5.5 Ah
Recommended chargers
GAL 18...
GAX 18...
GAL 36...
GAL 18...
GAX 18...
GAL 36...
Data transmission
Bluetooth
®
Bluetooth
®
4.2
(Low Energy)
D)
Bluetooth
®
4.2
(Low Energy)
D)
Signal interval
s
8
8
Max. signal range
E)
m
30
30
A) measured at 20 - 25 °C with battery
ProCORE18V 8.0Ah
.
B) Depends on battery in use
C) Limited performance at temperatures <0 °C
D) The mobile terminal devices must be compatible with
Bluetooth
®
Low Energy devices (version 4.2) and support the Generic Access Profile
(GAP).
E) The signal range may vary greatly depending on external conditions, including the receiving device used. The
Bluetooth
® range may be signi-
ficantly weaker inside closed rooms and through metallic barriers (e.g. walls, shelving units, cases, etc.).
Noise/Vibration Information
Noise emission values determined according to
EN 62841-2-5
.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
98
dB(A); sound power level
109
dB(A). Uncertainty K =
3
dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to
EN 62841-2-5
:
Sawing wood: a
h
<
2.5
m/s
2
, K =
1.5
m/s
2
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Fitting
u
Only use saw blades the maximum permitted speed of
which is higher than the no-load speed of the power
tool.
Bosch Power Tools
1 609 92A 5MD | (19.03.2020)
