Bosch PRAESENSA PRA-AD604, Configuration Manual, Page: 103 / 164

PRAESENSA Configure the system | en 103
Bosch Security Systems B.V. Configuration manual 2020-09 | V1.20 | PRAESENSA 1.20
5.10 Backup and restore
On the Backup and Restore pages, the configuration parameters could be backup/restored on
a externally (PC) location you prefer. To do so, see:
–
Backup, page 103
– Restore, page 104
5.10.1 Backup
To be sure that your configuration is not lost if it becomes e.g. corrupt, or when your system
controller is replaced, it is advisable to make a backup so it can be restored afterwards.
–
IMPORTANT: Notice that recorded messages are not part of the backup
configuration .tar.gz file:
–
Be sure that the used recorded messages are stored on a safe place and that they
possible need to be uploaded again after restoring the configuration file. This step is
only needed in case the system controller is/was reset to default and/or replaced .
See also Recorded messages, page 68.
Backup your configuration file
See Logon the application, page 35.
Proceed as follows:
1.
Below the Backup and restore configuration page, click Backup:
– A screen appears with the following items, to:
2. Enable (checkmark) the Configuration settings checkbox:
– All already submitted and saved configuration settings will be selected to backup to
a location on your connected configuration computer.
3. Enable (checkmark) User credentials and certificates:
– User credentials will be selected to backup, but also certificates will be done.
4. Enter your (new) Password in the text field (minimum 8 characters):
– Notice that the password used for the backup could be different from the one used
for logon the configuration.
5. Click the Create button:
– A .tar.gz backup file will be created.
– Depending on the web browser type (e.g. Firefox, Edge, etc.) a save/open file
selection screen will appear.
6. Depending on the web browser type, browse to the file location where you want to store
the backup file:
–
The configuration and credentials selected will be stored on the location you
selected.
7. If required, see Restore, page 104.
Refer to
– Recorded messages, page 68