Plena Easy Line SD Tuner BGM source
Configuration | en
17
Bosch Security Systems B.V.
Installation and Operation manual
PLE-SDT_OM | V1.0 | 2012.02
7
Configuration
Switch on the unit with the POWER switch (1).
Figure 7.1
Front view
Figure 7.2
Rear view
7.1
FM tuner
7.1.1
Tuner audio output level control
1.
Set the
TUNER
(26) audio output level control to the required amplifier input level.
–
The audio output level could be set between mute and 1.5 Vrms.
–
It is advised to set the control in the upper mid position, at start.
2.
Refer to
Section 11 Technical Data
for audio output level.
7.1.2
Preset radio frequency programming
1.
Select the FM tuner source with the remote control button
USB/SD/-TUNER
(39).
–
The green LED
TUNER
(21) will light up.
2.
Select the required FM radio frequency with the buttons
|<
(19) and
>|
(22).
3.
Press the button
PROG
(23).
–
The FM tuner LCD (16) shows the preset number (CHxx) flashing during this
process.
–
Maximum 30 presets could be stored.
4.
Press a button
1
to
10/0
(17) for preset position 1 to 10. Or:
5.
Press the button
1
to
10/0
(17) following by the button
+10
(20) for preset positions 11
to 30.
–
1st actuation of button
+10
: Preset 11 up to 19.
–
2nd actuation of button
+10
: Preset 20 up to 30.
6.
Press the button
PROG
(23) again to store the selected FM radio frequency as a preset.
7.
Refer to
Section 8.3.2 Preset FM radio frequency selection
.
Summary of Contents for PLE-SDT
Page 1: ...Plena Easy Line SD Tuner BGM source PLE SDT en Installation and Operation manual ...
Page 2: ......
Page 32: ......
