Bosch PKV9..DC1 series, Instruction Manual

Page: 6 / 21

Getting to know your appliance
en
5
*
Getting to know your
appliance
Getting to know y our appli ance
The instruction manual is the same for various different
hobs. You can find the hob dimensions in the overview
of models.
~
Page 2
The control panel
Notes
■
Depending on the operating condition of the hob the
controls which can currently be selected light up
brightly or dimmed. If you touch them, the relevant
function is activated.
■
The controls which cannot currently be selected do
not light up.
■
Always keep the controls dry. Moisture reduces their
effectiveness.
■
Do not pull pans close to the displays and sensors.
The electronics could overheat.
The hotplates
Notes
■
Any dark areas in the glow pattern of the hotplate
are due to technical reasons. The function of the
hotplate is not affected.
■
Hotplate temperature is regulated by the heat
switching on and off. The heat may also switch on
and off at the highest setting.
■
With multi-circuit hotplates the heater elements of the
inner filament circuits and the heater element of the
activations may switch on and off at different times.
â Hotplates with bridge heating element
Two individual hotplates can be interconnected with a
bridge heating element to create one large extended
cooking zone.
Under normal operation these hotplates both work as
normal single-circuit and dual-circuit hotplates.
[ W \
| p
Display
‚ - Š
Heat settings
• / œ
Residual heat
–©
Keep warm function
‰‰
Timer
Controls with illuminated bars above the symbols
#
Main switch
> Š
Childproof lock
Wipe protection
Û
Keep warm function
1
û
2
û
3
û
4
û Settings range
é
Sensor frying system
ö
Automatic zone control
t
Kitchen timer
y
Timer
x
Stopwatch function
Controls without illuminated bars above the symbols
ä Hotplate selection
Hotplate Activating and deactivating
$
Single-circuit hot-
plate
ð
Dual-circuit hotplate Touch the
ö symbol
ò
Tri-circuit hotplate
Touch the ö symbol; the 2nd filament
circuit is activated
Touch the
ö symbol again; the 3rd fila-
ment circuit is activated
When the hotplate is activated: the corresponding indicator lights up