Imp
ort
Ap
plia
nce
s.c
om
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Home Connect
en
15
5.
Use the "Home Connect" SSID and the "Home
Connect" key to register the mobile device on the
hob network.
The hob is connected to the home network if the
D
symbol no longer flashes but is lit up on the
cooking position display.
The appliance automatically tries to connect to the
app, and
•’
and
ƒ
are displayed alternately. The
‚
value flashes on the control panel.
6.
Start the app on the mobile device and follow the
instructions for manual network registration.
The log-in procedure has been completed once the
‹
value appears in the cooking position display.
Home Connect settings
You can adjust Home Connect to suit your
requirements at any time.
In the basic settings for your hob, navigate to the Home
Connect settings to display network and appliance
information.
Notes
■
The
•’ƒ
setting is only displayed if the appliance is
connected to the home network.
■
The
•’„
setting is only displayed if the appliance
has once connected to a network.
■
The
•’†
setting is only displayed if an update is
available.
■
The
•’‡
setting is only displayed if Customer
Service is attempting to connect to the appliance.
You can end this at any time after granting access.
■
The
•’ˆ
and
•’‰
settings are only displayed if
there is a connection to WLAN.
Deactivating WLAN
If WLAN is activated, you can use the Home Connect
functions.
Note:
In networked standby mode, your appliance
requires max. 2 W.
1.
Touch the
t
symbol for 4 seconds.
Product information will be displayed.
Symbol
Function
•’‚
Registration in the home network (WLAN)
‹
Not connected /disconnect network.
‚
Connect automatically.
ƒ
Connect manually.
„
Connected.
* Basic setting
W
•’ƒ
Connection to app
‹
Not connected.
‚
Connect.
•’„
Connect to WLAN
‹
Radio module switched off.
‚
Radio module switched on.
•’…
Settings via app
‹
Switched off.
‚
Switched on.*
•’†
Software update
‚
Update available and ready for installation.
ƒ
Starting installation.
•’‡
Remote access by Customer Service
‹
Not permitted.
‚
Permitted.
•’ˆ
WLAN signal strength
‹
Not connected to home network (WLAN).
‚
Signal strength 1 (poor)
ƒ
Signal strength 2 (moderate)
„
Signal strength 3 (good)
•’‰
Connection to Home Connect server
‹
Not connected.
‚
Connected.
Symbol
Function
* Basic setting