Bosch PKD9..N24 Series, Instruction Manual

Page: 10 / 16

10
Kitchen timer
You can use the kitchen timer to set a time of up to 99 minutes.
It runs independently of all the other settings.
Setting procedure
1.
Touch the
0
symbol, the
V
indicator for the kitchen timer
lights up.
‹‹
lights up on the timer display.
2.
Set the desired time in the settings range.
The timer starts counting down after a few seconds.
When the time has elapsed
A signal sounds once the time has elapsed.
‹‹
lights up on
the timer display. The
V
indicator for the kitchen timer lights
up. After 10 seconds, the indicator switches off.
Changing the time
Touch the 0 symbol, the V indicator for the kitchen timer
lights up. Set the desired time in the settings range.
Automatic time limit
If a hotplate is in use for a long time without the setting being
changed, the automatic time limit is activated.
The hotplate stops heating.
”‰ lights up in the hotplate
indicator.
The display goes out when you touch any control. You can
make new settings.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
Wipe protection
If you wipe over the control panel while the hob is switched on,
settings may be altered.
To prevent this from happening, your hob has a wipe protection
function. Touch the
-
symbol. A signal sounds. The control
panel is locked for 30 seconds. You can now wipe over the
control panel without altering any settings.
Note: The main switch is excluded from the wipe protection
function. You can switch off the hob at any time.
Basic settings
Your appliance has various basic settings. You can adapt these
settings to your needs.
Indicator Function
™‚
Automatic childproof lock
‹
Switched off.*
‚ Switched on.
™ƒ Audible signal
‹ Confirmation signal and operation error signal switched off.
‚
Only operation error signal switched on.
ƒ Confirmation signal and operation error signal switched on.*
™†
Automatic timer
‹
Switched off.
‚ - ŠŠ Duration after which the hotplates switch off
™‡ Duration of the timer end signal
‚ 10 seconds.*
ƒ n
30 seconds
„ 1 minute.
™ˆ
Activation of the filament circuits
‹
Switched off.
‚ Switched on.
ƒ
Last setting before the hotplate was switched off.*
*Basic setting