Bosch PKD1..Y Series, Instruction Manual, Page: 4 / 12

4
Getting to know your appliance
The instruction manual is the same for various different hobs.
An overview of the models with their dimensions is given on
page 2 .
The control panel
Your hob is equipped with 2 control panels. The displays and
the controls are the same. You can operate the hob from 2
sides.
Controls
When you touch a symbol, the respective function is activated.
Notes
■
The settings will remain unchanged if you touch several
symbols at once. This allows you to wipe up spills on the
control panel.
■
When looking at the control panel on the opposite side of the
hob, the display appears upside down. There is a risk of
confusion between heat settings 4, 6, 9 and with the
œ
residual heat indicator.
■
Always keep the controls dry. Moisture reduces their
effectiveness.
The hotplates
Residual heat indicator
The hob has a two-stage residual heat indicator for each
hotplate.
If
•
appears in the display the hob is still hot. It may be used,
for example, to keep a small meal warm or to melt cooking
chocolate. As the hotplate cools down further, the display
changes to
œ
. The display remains lit until the hotplate has
cooled sufficiently.
&RQWUROVIRU
PDLQVZLWFK
ZLSHSURWHFWLRQ
' FKLOGSURRIORFN
WLPHU
'LVSOD\VIRU
³ É KHDWVHWWLQJ
‡ ¤ UHVLGXDOKHDW
&RQWUROIRU
KRWSODWHVHOHFWLRQ
&RQWUROVIRU
$ HOHFWURQLFERLO
VWDUWFRQWURO
Í DFWLYDWLRQ
6HWWLQJVUDQJH
IRUDGMXVWLQJWKHKHDWVHWWLQJ
IRUDGMXVWLQJWKHWLPHU
Hotplate Activating and deactivating
$
Single-circuit hotplate
ð
Dual-circuit hotplate
Select the hotplate and touch the
ð
activation symbol
ò
Tri-circuit hotplate
Select the hotplate, touch the ð activation symbol; the 2nd filament circuit is activated.
Touch the
ð
activation symbol again; the 3rd filament circuit is activated.
â
Dual-circuit hotplate, hotplate
with extended cooking zone
Select the hotplate, touch the
ð
activation symbol; the 2nd filament circuit is activated.
Touch the
ð
activation symbol; the extended cooking zone is activated.
When the hotplate is activated: the corresponding display lights up.
When the hotplate is switched on: the last selected size is automatically selected again