background image

10

Care and cleaning

The advice and warnings contained in this section aim to guide 

you in cleaning and maintaining the hob, so that it is kept in the 

best possible condition

Hob

Cleaning

Clean the hob after each use. This prevents food remains left 

on the surface from burning. Wait until the hob is cold enough 

before attempting to clean it.
Only use cleaning products specifically designed for glass-

ceramic hobs. Follow the instructions provided on the 

packaging.
Do not use:

Abrasive products

heavy-duty cleaners, like oven sprays and stain removers

Pads that may scratch

High-pressure or steam cleaners 

Glass scraper

Remove dried-on food remains using a glass scraper.

1.

Release the scraper safety catch

2.

Use the blade to clean the hob surface

Do not attempt to clean the hob surface with the base of the 

scraper. This could result in scratching.

ã=

Risk of injury!!

The blade is extremely sharp. Risk of cuts. Protect the blade 
when not in use. Replace the blade immediately when any 
imperfections are found.

Care of the appliance

Apply an additive to protect and preserve the hob. Follow the 

advice and warnings provided with the product.

Hob frame

In order to avoid damage to the hob frame, follow the 

indications below:

Use only slightly soapy hot water

Do not use sharp or abrasive products

Do not use a glass scraper

 Fixing malfunctions

Malfunctions are commonly due to small details. Before calling 

the Technical Assistance Service, you should consider the 

following advice and warnings.

Indicator

Malfunction

Solution

none

The electric power supply has been inter-

rupted. 

Use other electrical appliances to check whether there has been a 

power cut. 

The appliance has not been correctly con-

nected according to the connection dia-

gram.

Check that the appliance has been connected correctly according to 

the connection diagram.

Electronic system malfunction.

If the above checks do not resolve the malfunction, contact the Tech-

nical Assistance Service.

 flashes

The control panel is damp or an object is 

resting on it.

Dry the control panel area or remove the object.

Ҥ

 + number / 

š

 + number / 

¡

 + number / 

Electronic system malfunction.

Turn the hob off from the mains. Wait 30 seconds or so and switch it 

back on.*

”‹

/

”Š

There is an internal error in the operation. Turn the hob off from the mains. Wait 30 seconds or so and switch it 

back on.*

”ƒ

The electronic system has overheated and 

the corresponding hotplate has been 

switched off.

Wait for the electronic system to cool down. Then push any symbol 

on the hob.*

”…

The electronic system has overheated and 

all the hotplates have been switched off.

” ‰

The hotplate has been working non-stop 

too long at a high power level.

The automatic time stop has been activated. Press any symbol on the 

control panel. The indicator goes out. The hob may now be switched 

back on.

—‚

Incorrect supply voltage, outside normal 

operating limits.

Please contact the local electricity board.

—ƒ

/

—„

The hotplate has overheated and has 

switched off in order to protect its cooking 

surface.

Wait until the electronic system has cooled down sufficiently before 

switching the hotplate back on.

* If the indication persists, call the Technical Assistance Service.

Do not rest hot pans on the control panel.

Summary of Contents for PIE645Q14E













Reviews: