9
Automatic time limitation
If the hotplate is used for prolonged periods and the settings
are not adjusted, the automatic time limitation function is
activated.
The hotplate stops heating. The
”
,
‰
‹
symbol and the residual
heat indicator
•
/
œ
flash alternatively in the display.
When the control is turned to setting 0, the indicator goes off.
The hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
Deactivating the warning signal
A short beep sounds to confirm that a symbol has been
touched. Depending on the model, this signal can be switched
off.
1.
Set the hotplates to the power level
„
.
2.
Switch the hotplates off individually, starting with the hotplate
which is controlled by the knob on the right-hand side of the
control panel.
3.
Press the
boost
G
symbol of the left hotplate for at least 5
seconds. After 5 seconds has elapsed a beep will sound to
confirm this.
The warning signal can be reactivated. To do this, follow the
same procedure as for deactivating the warning signal.
Care and cleaning
The advice and warnings contained in this section aim to guide
you in cleaning and maintaining the hob, so that it is kept in the
best possible condition
Hob
Cleaning
Clean the hob after each use. This prevents food remains left
on the surface from burning. Wait until the hob is cold enough
before attempting to clean it.
Only use cleaning products specifically designed for glass-
ceramic hobs. Follow the instructions provided on the
packaging.
Do not use:
■
Abrasive products
■
heavy-duty cleaners, like oven sprays and stain removers
■
Pads that may scratch
■
High-pressure or steam cleaners
Glass scraper
Remove dried-on food remains using a glass scraper.
1.
Release the scraper safety catch
2.
Use the blade to clean the hob surface
Do not attempt to clean the hob surface with the base of the
scraper. This could result in scratching.
ã=
Risk of injury!!
The blade is extremely sharp. Risk of cuts. Protect the blade
when not in use. Replace the blade immediately when any
imperfections are found.
Care of the appliance
Apply an additive to protect and preserve the hob. Follow the
advice and warnings provided with the product.
Hob frame
In order to avoid damage to the hob frame, follow the
indications below:
■
Use only slightly soapy hot water
■
Do not use sharp or abrasive products
■
Do not use a glass scraper
