Bosch PFS 3000-2, Original Instructions Manual

Page: 20 / 327

20 | English
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug. The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Symbols
The sticker regarding operation of the fine-spray system is located on the
base station. The correct interpretation of the symbols helps you operate the
fine-spray system quicker and more safely.
Symbols and their meanings Detailed description
The fine-spray system is
suitable for glazes and lac-
quers and for wall paints.
"Wood" application:
Spraying solvent-based and
water-dilutable lacquers,
glazes, primers, clear lacquers
and oils
"Wall" application:
Spraying emulsion and latex
paints
(see "Intended Use",
page 21)
Step 1:
Choose the correct nozzle
cap
Choose the grey nozzle
cap
(11) for the "wood" applic-
ation
Choose the white nozzle
cap
(10) for the "wall" applica-
tion
(see "Changing the Nozzle Cap
(see figures
B1 – B2 )",
page 22)
Step 2:
Setting the spray material
quantity
Select setting 1, 2 or 3 on the
thumbwheel
(4) for the "wood"
application
Select setting 3, 4 or 5 on the
thumbwheel
(4) for the "wall"
application
(see "Setting the spray mater-
ial quantity (see figure
J )",
page 24)
Set the "wood" application on
the sliding switch
(25)
Set the "wall" application on
the sliding switch
(25)
(see "Setting the Air Flow
(see figure
D )", page 24)
1 609 92A 685 | (09.09.2021) Bosch Power Tools