6
Electrical Installation
Electrical Requirements
You can find the identification plate with the electrical
specifications on the underside of the appliance. The
junctionbox must be located within 3 feet of the cooktop
connection. It should be easily accessible for service
purposes.
Connect Electrical Supply
9
WARNING
Before installing, turn off at the service panel. Lock
service panel to prevent power from being turned
on accidentally.
The electrical power supply system should be a 1-phase,
3-wire system with ground connection. Install suitable
junction box (not furnished). An appropriately-sized, UL-
listed conduit connector must be used to correctly attach
the conduit to the junction box.
The branch-circuit breakers ampacity, the wire sizes and
the connections must be conform to the requirements of
the National Electrical Code or Canadian Electrical Code
and all local codes and ordinances.
Attach flexible conduit to the junction box.
9
WARNING
To reduce the risk of electric shock and fire, do not
use a flexible power supply cord.
Connect the cooktop lead wires to the junction box
supply wires in proper phase:
black (L1) to black
red (L2) to red
green wire to ground
Check the Installation
9
CAUTION
Before you plug in an electrical cord or turn on
power supply, make sure all controls are in the OFF
position.
Remove everything from the cooktop surface including
stickers. Clean cooktop surface with cooktop cleaning
creme.
Switch on the circuit breaker.
Verify that elements function properly.
Model
240 V AC, 60 Hz
system:
circuit breaker
208 V AC, 60 Hz
system:
circuit breaker
NET5466SC
30 Amp
30 Amp
PP
PP
-ER[
&RQGXLWDSSUR[
IHHWaPP
PP
)LWWLQJ&RQGXLW
PP
DSSUR[
