12
en | Installing a Recessed Mount
IP200 MiniDome In-Ceiling Mount
AM18-Q0626 | v1.0 | 2012.09
Installation Manual
Bosch Security Systems
to the mount using the M4 x 15 mm mounting screws.
Ensure that the cable is aligned with the cutout in the
recess mount.
4.
Attach the camera base, and then install the upper
housing/bubble. (See the camera User Manual for details.)
Figure 4.7
Attach Camera to Recess Mount
5.
Align the two mounting screws attached to the trim ring
with the two mounting holes in the recess mount.
NOTICE!
The recessed mounting bracket is provided with an additional
safety tether point. To prevent injury, attach a safety wire from
a secure anchor point above the ceiling to this tether point.
