Bosch NDA-FMT-DOME, Installation Manual

Page: 7 / 14

3. Optional: if installing the camera to a suspended ceiling tile
or any other surface where additional support is required,
the VGA-IC-SP mounting kit (sold separately) is
recommended. See the instruction book supplied with the
mounting bracket for installation instructions.
Figure 3.2: Mounting bracket
4. Ensure that the clamping plates are angled inward by
pushing up and into the two slots.
5. Insert mount through the hole and into the ceiling. Slide
clamps out and down so that the drywall is clamped in
between the clamps and the bracket flange, 41.7 mm (1.64
in.) maximum ceiling thickness and 9.7 mm (0.38 in.)
minimum ceiling thickness).
In-ceiling mount Installing a Recessed Mount | en 7
Bosch Security Systems 2014.08 | v1.0 | AM18-Q0679