Bosch NBN-733 Software Manual Download Page 26

Page: 26 / 111

Camera Browser Interface

Settings Overview | en

Bosch Security Systems

Software manual

AM18-Q0635 | v5.6 | 2013.01

4.2

Settings

Navigation

To view the current settings:

Click the

Basic Mode

menu or the

Advanced Mode

to expand it.

For the

Advanced Mode

menu, click a menu sub-heading

to expand it.

Click a sub-menu. The corresponding page is opened.

Making Changes

You can change the settings by entering new values or by

selecting a predefined value from a list field.

Note:

When entering names do not use any special characters, for

example

. Special characters are not supported by the internal

recording management system.

Saving changes

After making changes in a window, click

Set

to send the new

settings to the device and save them there.

Clicking

Set

saves only the settings in the current window.

Changes in any other windows are ignored.

Click

SETTINGS

in the applications title bar to close the

window without saving the changes made.

Note:

All settings are backed up in the device memory so they are not

lost even if the power fails. The exception is the time settings,

which are lost after 1 hour without power if no central time

server is selected.

Summary of Contents for NBN-733
















































































































Bosch NBN-733, Software Manual, Page: 26 / 111

Search results

Summary of Contents for NBN-733

Reviews: