8
en
Overview
Overview
Fig.
A
1 Housing
a
Setting ring
b
Marking
Ä
c
Scale for grinding level
1 = fine
6 = coarse
d
Marking
<
e
Marking
t
f
Discharge chute
g
Drive coupling
2 Grinding cone
3 Grinding ring
a
Marking
Ü
4 Filling tray
a
Scale for fill level
Before using for the first
time
Before the new accessory can be used,
it must be fully unpacked, cleaned and
checked.
Caution!
Never operate a damaged accessory!
■ Remove all accessories from the
packaging and dispose of all packing
materials.
■ Check that all the parts are present and
examine them for obvious damage.
X
Fig.
A
■ Thoroughly clean and dry all parts
before using for the first time.
X
“Clean-
ing and maintenance” see page 9
Symbols and markings
Symbol
Meaning
W
Caution! Rotating tools. Do not
reach into the feed chute.
t
Marking for reading setting
Ä
Removing / inserting
grinding ring
1 .... 6
Scale for grinding level
Setting 1 (fine) to 6 (coarse)
<
Caution!
Blocking of
grinding unit.
Ü
Inserting grinding ring
Preparation
■ Place the base unit on a flat, clean
surface.
■ Insert the bowl with lid.
■ Press the Release button and
move the swivel arm to posi
-
tion
2
. Remove the protective
drive cover.
Assembling the mill
X
Image sequence
B
1.
Turn the setting ring in an anticlockwise
direction to the stop. Markings
Ä
and
t
must match up exactly. Place
the grinding cone on the square shaft
in the housing and press right down.
2.
Insert the grinding ring in the housing.
Markings
Ü
,
Ä
und
t
must match up
exactly.
Note:
It is only possible to insert and
remove the grinding ring properly when in
this position.
3.
Press the grinding ring down lightly
and turn the setting ring in a clockwise
direction until the scale for the grinding
level is reached.
4.
Attach the filling tray.
Summary of Contents for MUZ4GM3
Page 73: ......
Page 75: ...ck er acht on 6 1 1 2 3 4 a a a b e f g c d A B 3 4 1 2 ...
