Bosch MSK030B-0900-NN Project Planning Manual Download

Page: 228 / 282

9.12

Motor cooling

9.12.1

Natural convection

Rexroth motors in standard design are self-cooling. The heat dissipation is

realized via natural radiation to the ambient air and by heat conduction to the

machine structure. The nominal data are achieved at ambient temperatures

of up to 40 °C. Sufficient heat radiation must be ensured by the installation

situation. Unhindered vertical convection has to be ensured by a sufficient

distance of 100 mm to adjacent components on the side surfaces.

Contamination of the motors reduces heat dissipation. Pay atten‐

tion to cleanliness!

9.12.2

Fan units

Fan units are available for certain motor types. The performance data given

in the technical data are marked with the index "S" for "surface". Descriptions

of the technical data of the available fan units can be found at

chapter 7.2

"Fan units for MSK motors" on page 180

Cooling takes place via air streams which are guided over the surface of the

motor by air baffles. The fan is designed to use clean air from its surround‐

ings to cool the motor.
The use of the fan under the following conditions is expressly not suitable:
●

Delivery of air which contains abrasive particles

●

Delivery of air which has a strongly corroding effect, e.g., salt mist

●

Delivery of air which contains a high dust load, e.g., extraction of saw

dust

●

Conveying of flammable gases/particles

●

Use of the fan units as safety-related components or for the assumption

of safety-relevant functions

In order for the required air volume to be converted by the fan unit, a mini‐

mum distance must be maintained between the fan grille and the machine for

the air to be sucked in or blown out. The distance results from the motor

structure.

80 mm

80mm

①

Machine

②

Air outlet space

①

Air suction area

Fig. 9-13:

Fan units installation area, minimum distance

Consider the minimum distance of the air supply ③ when designing the ma‐

chine.

Bosch Rexroth AG

DOK-MOTOR*-MSK********-PR12-EN-P

226/279

Synchronous Servomotors MSK

Operating conditions and application notes

Summary of Contents for MSK030B-0900-NN



























































































































































































































































































Search results

Summary of Contents for MSK030B-0900-NN

Reviews:

Related manuals for MSK030B-0900-NN

Brands by name

Popular brands

Bosch MSK030B-0900-NN, Project Planning Manual

Search results

Summary of Contents for MSK030B-0900-NN

Reviews:

Related manuals for MSK030B-0900-NN

Brands by name

Popular brands