34 | en
7 620 210 017 | 11.2013
Robert Bosch Car Multimedia GmbH
Adjusting the volume
adjusted the volume before switch-off to be
higher than maximum power-on volume, the
volume is automatically limited to the adjusted
power-on volume when you switch it on again.
Note:
To protect your hearing, the maxi-
mum power-on volume is limited to
the value 25.
f
Press the
MENU
5
button to open the
menu.
f
Press the
MENU
5
button repeatedly
until "ONVOL" appears on the display
along with the current setting.
f
Turn the volume control
1
to the left or
right in order to set the switch-on volume
to between 5 and 25.
In order to leave the menu
f
Press the
MENU
5
button, repeatedly if
necessary.
Setting the speed-dependent vol-
ume adjustment (GALA)
This function automatically adjusts the volume
of the car sound system to the speed driven
and the associated driving noises. For
example, at an increased speed, the volume is
automatically increased to compensate for the
increased driving noise (e.g. due to the
airstream).
For this purpose, the vehicle must provide the
speedometer signal, and the car sound system
must be connected accordingly.
The automatic increase in volume can be
adjusted in 6 increments (OFF, 1-5).
f
Press the
MENU
5
button to open the
menu.
f
Press the
MENU
5
button repeatedly
until “GALA” appears on the display along
with the current setting.
f
Turn the volume control
1
to the left or
right in order to switch volume increase on
or off or to adjust it.
In order to leave the menu
f
Press the
MENU
5
button, repeatedly if
necessary.
Adjusting the telephone volume
(PHVOL)
You can adjust the volume with which the
person to whom you are speaking is played
through the unit's loudspeakers.
f
Press the
MENU
5
button to open the
menu.
f
Press the
MENU
5
button repeatedly
until "PHVOL" appears on the display
along with the current setting.
f
Turn the volume control
1
to the left or
right in order to set the switch-on volume
to between 0 and 32.
In order to leave the menu
f
Press the
MENU
5
button, repeatedly if
necessary.
Microphone mode
You can connect one microphone to the
device.
Starting microphone mode (MIC)
f
Switch on the microphone.
“MIC” appears in the display.
02_MR12_en.indd 34
25.11.13 16:23