MIC Series 400 Camera | 3
18x Optical Zoom Module
Lens
F=4.1 mm (wide) to 73.8 mm (tele), F1.4 to
F3.0
Zoom
18x optical (12x digital)
Angle of view
48° (wide) to 2.8° (tele)
Minimum illumination
0.7 lux (F1.4, 1/60s NTSC, 1/50s PAL)
0.11 lux (F1.4, 1/4s NTSC, 1/3s PAL)
0.01 lux (F1.4, 1/4s NTSC, 1/3s PAL ICR on)
Shutter speed
1/1 to 1/10,000 s (22 steps) NTSC, PAL
36x Optical Zoom Module
Lens
F=3.4 mm (wide) to 122.4 mm (tele), F1.6 to
F4.5
Zoom
36x optical (12x digital)
Angle of view
57.8° (wide) to 1.7° (tele)
Minimum illumination
1.4 lux (1/60 s NTSC, 1/50 s PAL, typical,
F1.6, 50IRE);
0.1 lux (1/4 s NTSC, 1/3 s PAL, typical, F1.6,
50IRE)
ICR-ON mode: 0.01 lux (1/4 s NTSC, 1/3 s
PAL)
Shutter speed
1/4 to 1/10,000 s (20 steps) NTSC, 1/3 to
1/10,000 s (20 steps) PAL
Operational
Auto flip
Yes
Manual flip
Yes
Dynamic privacy zones
3D privacy masking with infinite zones, (some
models, see ordering guide)
Presets
64 telemetry presets utilizing resolver technol-
ogy (using FV protocol, 10 camera set-up pre-
sets to allow ANPR, color correction etc.)
Preset tours
6 tours each with up to 32 presets
Sector titles
Yes (64 sectors) 20 characters per title
Preset titles
20 character caption for each of the 64 pre-
sets
Home position
Yes (preset 1 or tour)
Communication and Protocols
Communication
RS485 / RS422
Control protocol
Bosch or FV protocol cameras available, addi-
tional supported protocols are Pelco D, Kala-
tel, 360 Vision, American Dynamics, Panason-
ic, Molynx, VCL, and Vicon.
These can be loaded using the MIC-
USB485CVTR signal converter and Cam-set
via a PC.
Biphase control requires a Biphase to RS485
converter (MIC-BP4, available separately) to
connect to Bi-phase equipment.
Connectivity
Video
Co-axial via composite cable
Telemetry control card
Built-in
Telemetry
Twisted pair. Simplex, half and full duplex op-
eration via composite cable
MIC Universal Camera
Setup Software Utility
(Cam-set)
Supplied with each camera, Cam-set allows di-
rect connection to a USB equipped PC via the
MIC Series PSU or over a full duplex or IP net-
work to provide access to all camera functions
and useful diagnostic tools.
USB to RS485 signal con-
verter
Allows MIC Series cameras to connect to a PC
(supplied free with MIC Series 400 camera or
available separately).
Power
Via composite cable
Alarms
Alarm inputs
1 tamper input (additional inputs possible with
optional alarm card in PSU)
Alarm communication
Tamper switch (ground connection)
Mechanical
Drive unit
Brushless, integral pan/tilt motor drive
Pan angle
360° continuous rotation
Pan speed
6° to 90° per second (variable)
Tilt angle
270°
Tilt speed
0.2° to 90° per second (variable)
Speed control
Closed loop electronics
Preset accuracy
±0.56° (typical)
Proportional Pan/Tilt to
Zoom
Yes
Construction
Construction material
Machined aluminum
Viewing window
Tempered flat glass
Window wiper
Standard, long-life silicone wiper
Heater
Standard
Standard colors
Black( RAL9005), Gray (RAL7001) or White
(RAL9003)
Standard finish
Alodine 5200 surface treatment with powder
coat paint
Dimensions (WxHxD)
205 x 360 x 165 mm
(8.07 x 14.17 x 6.50 in.)
(upright and inverted)
Weight
5.5 kg (12 lb) including 4-in. pitch circle diam-
eter (PCD) base
Configurations available Upright mount or upright canted at 45° mount.
(Inverted mount is possible using software set-
ting and upright camera.)
Environmental
Operational temperature -40 °C to +50 °C (-40 °F to +122 °F)
Weather proofing
IP68
MTBF
73,817 hours
www.boschsecurity.com
