Night Mode
With infrared (IR) (B/W)
0 lux
0 lux
SensUp Off
0.066 lux
0.166 lux
SensUp On
(NTSC: 1/4s, 15X; PAL 1/3s, 16.7X)
0.0026
lux
0.0082 lux
Electronic Shutter Speed
1/1 to 1/10,000 sec., 22 steps
Signal-to-Noise Ratio
(SNR)
>50 dB
White Balance
2000 K to 10,000 K
2 Unless otherwise stated, test conditions are: F1.35, shutter = NTSC 1/60s, PAL 1/50s;
max AGC
IR Illuminators
LED Array
High-efficiency Surface Mount (SMT) LEDs
Number of LEDs
7 per lamp
Wavelength
850 nm (semi-covert)
Beam Angle
30º
DCRI Performance
Range
(with SensUp ON)
Detection: 150 m (492 ft)
Classification: 100 m (328 ft)
Recognition: 75 m (246 ft)
Identification: 60 m (197 ft)
Ingress Protection
Rating
IP68
Construction Material
Aluminum with Lexan® front window
Mechanical
Drive Unit
Brushless, integral pan/tilt motor drive
Pan Range
360° continuous rotation
Tilt Angle
186.6°
Tilt Range
Upright unit: -58° - +90°
Canted unit: -103° - +70°
Variable Speed
Pan: 0.2°/second - 120°/second
Tilt: 0.2°/second - 60°/second
Pre-position Speed
120°/second
Preset Accuracy
0.17° (typical)
Proportional Pan / Tilt
to Zoom
Yes
Audible Noise
<66 dB
Electrical
Camera
IR Illuminator
Input Voltage
18 VAC nominal
26 VDC nominal
Power Consumption
18 W maximum
26 W maximum
Current Consumption
1 A maximum
1 A maximum
Miscellaneous
Sectors / Titling
16 independent sectors with 20-character titles/
sector
Privacy Masking
24 individually configurable privacy masks
Pre-positions
99, each with 20-character titles
Camera Setup /
Control
RS-485, Bilinx (coax)
Communications
Protocols
Bosch (OSRD, Bilinx), Pelco P/ D, Forward Vision
(Bosch OSRD requires use of converter device
(MIC-BP3, sold separately.))
Guard Tours
Two (2) types of tours:
• Recorded tours - two (2), total duration
15 minutes
• Preset tour - one (1), consisting of up to
99 scenes, consecutively and (1)
customized up to 99 scenes
Window Wiper
Standard
Washer Drive
Optional washer kit (MIC-WKT Kit used with the
appropriate HAC-WAS washer pump)
Supported
Languages
English, Czech*, Dutch, French, German, Italian,
Polish, Portuguese, Russian*, and Spanish
* Available with separate language upload
User Connections
Power, Camera
Via composite cable (sold separately)
Power, IR Illuminator
Via composite cable (sold separately)
Control Data
RS-485 (Twisted pair; Simplex, half and full
duplex operation via composite cable)
Biphase ±
(Optional; requires MIC Biphase module with
external power supply.)
Video
Coaxial via composite cable (sold separately)
Alarm Inputs
Four (4) tamper inputs
Relay Outputs
Two (2) relay outputs and washer relay
output only with optional alarm card
Alarm
Communication
Tamper switch (ground connection)
Software
CTFID software allows direct connection to a
USB-equipped PC via the MIC Series PSU
over a full du-plex to provide access to all
camera functions and useful diagnostic tools.
Environmental
Ingress Protection
Rating
IP68
Operating
Temperature
-40 °C to +60 °C (-40 °F to +140 °F)
Cold Start-up
Temperature
-40 °C (-40 °F)
(Requires 30-minute warm-up prior to PTZ
operations)
5 | MIC Series 550 Infrared Camera
