安装步骤概述
要安装
MIC
摄像机，请按顺序执行执行以下步骤：。
注：视摄像机型号、期望的安装位置和方向以及安装支架和所选摄像机附件而定，您可能并不需要完成每
个步骤。
Determine system
configuration.
Operate the camera.
(Refer to Section 16.)
Connect network cable
(Refer to Section 10.)
Install
illuminator.
Install
sunshield.
Configure settings.
(Refer to Section 13.)
Alarm/Washer
Interface Unit
VIDEOJET connect
PSU
Cant the camera.
(Refer to Section 11.)
Install cabling between power
source and camera mounting site.
Install MIC Camera.
(Refer to Section 9.)
Power supply source
or PoE device
Connect and configure
camera in box or
on table-top stand.
(Refer to Sections 5 & 6.)
Install optional accessories.
(Refer to individual installation manuals.)
Select mounting
location and
orientation.
(Refer to Section 7.)
Install mounting
accessories and
conduit (if applicable).
Identify required
mounting accessories.
(Refer to Section 8.)
Identify Mounting Site Requirements.
Install a
sunshield?
YES
YES
NO
NO
Will
camera
be canted?
Pre-
configure
camera?
NO
YES
YES
NO
Install
optional
camera
access-
ories?
3
MIC IP starlight 7000 HD, MIC IP
dynamic 7000 HD
安装步骤概述
| zh-CHS
41
Bosch Security Systems
Quick Installation Guide
2014.06 | 1.0 | F.01U.291.521
