Bosch MCC9555FWC, User Manual

Page: 122 / 152

en
Cleaning and servicing
122
20.7 Cleaning the twin whisk
1.
Remove both beating whisks from
the twin whisk.
2.
Carefully clean all parts under run-
ning water using a brush.
3.
Dry all parts.
4.
Position the beating whisks vertic-
ally on the pins and push in firmly.
The beating whisks must move
easily.
a
The beating whisks engage aud-
ibly.
Tip:
You can clean the twin whisk in
the dishwasher.
20.8 Cleaning the pot
Requirement:
The tool has been re-
moved. → Page 102
1.
Clean the pot thoroughly.
2.
Wipe down the pot with a soft,
damp cloth and then dry.
Note:
If you are cleaning the pot in
the dishwasher, remove the tool
holder.
Tips
¡
You can clean the pot in the dish-
washer.
¡
You can remove light discoloura-
tion on the bottom of the pot with
water and a little vinegar.
→
"Descaling the pot", Page 122
20.9 Descaling the pot
Requirement:
The first signs of
limescale are visible.
1.
Take the pot out of the main unit.
2.
Use a normal household descaler
in the pot according to the instruc-
tions.
3.
Clean the pot with a dishwashing
brush or soft cloth.
4.
Rinse the pot with plain water.
5.
Dry the pot.
20.10 Cleaning the tool
holder
1.
Remove the tool holder.
→
Page 120
2.
Remove the silicone sealing ring
from the tool holder.
3.
Clean the silicone sealing ring with
a soft cloth under running water.
4.
Clean the tool holder with a brush
under running water.
5.
Dry all parts.
6.
Insert the tool holder with the silic-
one sealing ring.
7.
Turn the pot on its side.
8.
Tighten the threaded ring with
wings as far as it will go.
a
The symbols and line up.
Tip:
You can clean the tool holder
and the silicone sealing ring in the
dishwasher.