Bosch MAP Control Center IUI-MAP0001-2 User Manual Download Page 53

Page: 53 / 64

MAP Control Center

Operation | en

Bosch Sicherheitssysteme, GmbH

User Manual

2014.11 | 06 | F.01U.168.328

Figure 2.83

Attention – Event Communication is disabled during Walk Test

Then the

Walk Test Points Tested

screen (

Figure 2.84 Walk Test - Points Tested screen, page 53

) opens, showing the last point tested and a list of untested points. From this screen, the user
can select the

View Tested

button or the

Print

Test

button.

When the

View Tested

button is selected, a screen opens with a list of the points already

tested. The

View Tested

button is now

View Untested

. This allows the user to toggle between

tested and untested points.

Figure 2.84

Walk Test - Points Tested screen

The

Print Test

button is also available on this screen. When the

Print Test

button is selected

from the

Walk Test Points Tested

screen, the

Print Walk Test

screen (

Figure 2.85 Print Walk

Test screen, page 54

) opens, showing two options.

–

Print Tested Points

–

Print Untested Points

Summary of Contents for MAP Control Center IUI-MAP0001-2

































































Search results

Summary of Contents for MAP Control Center IUI-MAP0001-2

Reviews:

Brands by name

Popular brands

Bosch MAP Control Center IUI-MAP0001-2, User Manual

Search results

Summary of Contents for MAP Control Center IUI-MAP0001-2

Reviews:

Brands by name

Popular brands