Bosch MAP Control Center IUI-MAP0001-2 User Manual Download Page 49

Page: 49 / 64

MAP Control Center

Operation | en

Bosch Sicherheitssysteme, GmbH

User Manual

2014.11 | 06 | F.01U.168.328

–

Enabled

(

Notice!

The user can enable or disable a device only if the area containing the device is not armed.

Figure 2.75

Enable/Disable Device screen

To find a specific device in the list, the user can search or sort the list. Press the

Search

button to show the Search Enable / Disable Devices screen (

Figure 2.76 Search Enable /

Disable Device screen, page 49

). Use the numeric, alphabetic, and command keys to enter a

device's name. The name appears in the

Search Enable / Disable Device

field. Press the

Enter

button to start the search.

Figure 2.76

Search Enable / Disable Device screen

To sort or filter the list of devices, press the

Sort / Filter

button. The

Sort / Filter Enable /

Disable Device

screen (

Figure 2.77 Sort / Filter Enable / Disable Device screen, page 50

)

opens. Select a filter category from the list:
–

List All Devices

–

List Faulted Devices

–

List Disabled Devices

–

List Enabled Devices

Press the

A - Z

Z - A

button to select the sorting sequence.

Summary of Contents for MAP Control Center IUI-MAP0001-2

































































Search results

Summary of Contents for MAP Control Center IUI-MAP0001-2

Reviews:

Brands by name

Popular brands

Bosch MAP Control Center IUI-MAP0001-2, User Manual

Search results

Summary of Contents for MAP Control Center IUI-MAP0001-2

Reviews:

Brands by name

Popular brands