Bosch MAN-REG-X-08, Installation Instructions Manual

Page: 9 / 24

9
INITIAL PREPARATIONS
•
Determine the operating voltage at the
installation site. The camera‘s Voltage Regulator
Board accepts both 12-24VDC and VAC input
without change to internal connections.
See
Section 2, Input Power/Video Output
Connections
.
•
Determine the optimum location for the camera.
See
Section 3, Mounting Specification.
•
All cameras have been tested prior to shipment.
To verify the camera is operational when
connected to a power supply and monitor, a
retro reflective license plate should be placed in
view of the camera to see a license plate image
otherwise the image may appear dark or black.
Note: The camera has been optimized to capture
vehicle license plates of moving vehicles under all
lighting conditions.
GUIDELINES
The installation of the REG-X camera is explained in
Sections 1 to 3.
It is important that these steps are followed and practice
proper installation procedures with proper safety
equipment.