Bosch LTE 65EU, Manual

Page: 20 / 40

4 | Tools
20 / 40 Telemetry_System_LTE65_Manual Bosch Motorsport
4.3.3 Communication Specific Settings
Ethernet RX Settings
In the New: COM tab, select the drop-down menu and type in “UDP”. For the Udp Port,
type in the port number assigned to the device. Each vehicle being read by a single re-
ceiver device must have a unique port number. This information is found in the Port
column of the Routes page in RaceConnect.
Serial RX Settings
In the New: COM tab, select the drop-down menu select the COM port being used to re-
ceive the serial data. Select the Baudrate being used by the LTE65 receiver.
Once complete, select OK to close the window.
4.3.4 Status Information
WDServer gives status information on each car configured in the tool. Data given includes
the lap number, distance, and time. Additional troubleshooting information is given for
Byte/Sec received and Block/Sec decoded. Byte/Sec is data received by WDServer from
the LTE65 while Block/Sec is data decoded by WDServer using the INI file.