I
n
s
t
a
l
l
a
t
i
o
n
I
n
s
t
r
u
c
t
i
o
n
s
These features are available on
System4 Series
only.
Keyboard:
(LTC 2601/00 and LTC 2602/00 models only).
Connect a remote keyboard with Pan/Tilt/Zoom for control and programming.
Console: Connect a host computer for CCL command inputs, or a Bosch LTC 2650 Graphical User Interface, or a printer.
SDA: Five biphase outputs for a Bosch AutoDome
®
or Receiver/Driver.
Connect cameras (up to 16)
to camera BNC inputs.
Follow steps 1-8 for quick installation
If looping is required,
connect camera out to
second source (second BNC).
Connect a monitor to
MON A output for
multiscreen display
and tape playback.
Connect a monitor to
MON B output if needed.
NOTE: For System4 Triplex Series
only, MON B can display a quad
or a multiscreen picture when
operating in live or playback mode.
For playback, connect the
Output of the VCR to VCR
IN on the multiplexer.
For recording, connect the
Input of the VCR to the
VCR OUT on the multiplexer.
Synchronize the Mux with the VCR by
connecting pin 21 (VEXT INPUT 1)
to VCR Clock Out on your recorder.
Connect pin 25 to VCR ground.
For 6-Channel LTC 2622, refer to the
Instruction Manual
Apply power to the unit.
The Console, SDA, KB, SVHS,
and Fonts are available with
System4
Series only. Refer to the
Instruction Manual for details.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
1
2
3
4
5
8
7
Pin 25
Pin 21
7
5
4
3
1
2
8
6
