Home Connect
en
41
5.
Follow the instructions in the app
until the process is complete.
Refrigerator compartment
temperature display shows
PA
and
freezer compartment temperature
display shows
On
.
The refrigerator is successfully
connected with the app.
If the connection fails, check whether
the mobile device is connected to
the home network (WLAN).
Then try to establish the connection
again.
If
Er
appears in the freezer
compartment temperature display,
reset the Home Connectsettings.
Note:
When resetting, all the Home
Connect settings are reset.
Verify signal strength
You should verify the signal strength if
no connection can be established.
1.
Press the
|
button.
The refrigerator compartment
temperature display shows
Cn
.
2.
Press button
</>
refrigerator
compartment until the refrigerator
compartment temperature display
shows
SI
. In the freezer
compartment temperature display a
value appears between 0 (no signal)
and 3 (full signal).
The signal strength should be at
least 2. If the signal strength is too
weak, the connection may be
interrupted.
–
Place the router and refrigerator
closer together.
–
Ensure that the connection is not
interfered with by screening walls.
–
Alternatively, install a repeater to
make the signal stronger.
Resetting Home Connect settings
If there is a problem when trying to
establish a connection or if you would
like to register the appliance in a
different home network (WLAN), the
Home Connectsettings can be reset:
1.
Press the
|
button.
The refrigerator compartment
temperature display shows
Cn
.
2.
Press button
</>
refrigerator
compartment until the refrigerator
compartment temperature display
shows
rE
and the freezer
compartment temperature display
shows
OF
.
3.
Press button
</>
freezer
compartment.
Freezer compartment temperature
display shows an animation for
15 seconds.
Then the freezer compartment
temperature display shows
OF
.
The Home Connect settings have
been reset.
Installing updates for the
Home Connect software
The refrigerator checks at regular
intervals whether updates are available
for the Home Connectsoftware.
If an update is available, the refrigerator
compartment temperature display
shows
UP
.
Pressing any button will reset the
display to the set temperature.
Installing the update:
1.
Press the
|
button.
The refrigerator compartment
temperature display shows
Cn
.
2.
Press button
</>
refrigerator
compartment until the refrigerator
compartment temperature display
shows
UP
and the freezer
compartment temperature display
shows
OF
.
