Bosch KIR25 Series, Instructions For Use Manual

Page: 24 / 81

en
24
Operating tips
■
While the refrigeration unit is running,
water droplets or a thin layer of ice
may form at the rear panel of the
refrigerator. This is nothing unusual.
It is not necessary to scrape off the
frost or wipe off the water droplets.
The rear panel defrosts automatically.
The condensation collects in the
condensation channel and is carried
to the refrigeration unit where it
evaporates.
■
If the air humidity is high,
condensation may form in the
refrigerator compartment, especially
on the glass shelves. If this is the
case, pack or wrap the food and
select a lower temperature in the
refrigerator compartment.
Setting the
temperature
Fig.
2
The temperature can be set from
+2 °C to +8 °C.
Keep pressing temperature setting
button 3 until the required refrigerator
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on the
temperature display 4.
Super cooling
Super cooling sets the refrigerator
temperature to the coldest temperature
setting for approx. 6 hours. Then the
appliance automatically switches to the
temperature set prior to super cooling
mode.
Switch on super cooling mode, e.g.
■
before placing large quantities of food
in the refrigerator compartment.
■
for the fast cooling of drinks.
Switching on and off
Fig.
2
Press “super” button 2.
The button is lit when super cooling is
switched on.
Note
When super cooling is switched on,
increased operating noises may occur.
Alarm function
Door alarm
The door alarm (continuous sound)
switches on if the appliance door is open
for longer than two minutes. Close the
door to switch off the warning signal.
Switching off the alarm
Fig.
2
Press the alarm button 1 to switch off
the warning signal.