en
Home Connect
28
‒
Place the router and refrigerator
closer together.
‒
Ensure that the connection is
not interfered with by screening
walls.
‒
Install a repeater to strengthen
the signal.
1.3 Installing updates for the
Home Connect software
The appliance searches for updates
to the Home Connect software at reg-
ular intervals.
Note:
If updates are available, the
temperature display (refrigerator
compartment) shows
.
To reset the update and the temper-
ature display (refrigerator compart-
ment) to the set temperature, press
any touch field.
1.
Press
+
at the
same time.
a
The temperature display (refriger-
ator compartment) shows
.
2.
Press
repeatedly until the tem-
perature display (refrigerator com-
partment) shows
and the tem-
perature display (freezer compart-
ment) shows .
3.
Press .
a
The temperature display (freezer
compartment) shows an animation.
a
The update is installed.
a
The control panel is locked during
the installation.
a
If the installation is successful, the
temperature display (freezer com-
partment) shows
.
4.
If the temperature indicator (freezer
compartment) shows , the appli-
ance was unable to install the up-
date.
‒
Repeat the process at a later
point.
5.
If the update cannot be completed
after several attempts, contact cus-
tomer service .
1.4 Resetting Home Connect
settings
If your appliance experiences con-
nection problems with the WLAN
home network (Wi-Fi) or your appli-
ance wants to log into a different
WLAN home network (Wi-Fi), you can
reset the Home Connect settings.
1.
Press
+
at the
same time.
a
The temperature display (refriger-
ator compartment) shows
.
2.
Press
repeatedly until the tem-
perature display (refrigerator com-
partment) shows and the tem-
perature display (freezer compart-
ment) shows .
3.
Press .
a
The temperature display (freezer
compartment) shows an animation
for 15 seconds.
a
The temperature display (freezer
compartment) then shows .
a
The Home Connect settings have
been reset.
1.5 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
¡
Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
