wLSN
wLSN Devices | en
23
Bosch Security Systems, Inc.
System Reference Guide
F01U138553 | 01 | 2010.05
Adjusting the Microwave Range in Dual Motion Detectors
If the detector’s red or yellow LED does not light, the
microwave coverage requires adjustment:
1.
Turn the potentiometer as shown in
to increase
or decrease the coverage.
2.
Repeat the walk test.
Refer to
Section 5.3.2 Walk Test, page 24
3.
Repeat
Steps 1
and
2
until the required coverage is met.
Figure 5.4
Adjusting the Dual Motion Detector’s Microwage Range
NOTICE!
The microwave sensor in the dual motion detectors is adjusted
in the factory to sense motion to a minimum of 11 m (35 ft).
_
+
Summary of Contents for ISW-BDL1-W11PGX
Page 1: ...wLSN wireless Local SecurityNetwork en System Reference Guide ...
Page 2: ......
Page 57: ......
