Bosch IntuiKey Series, Installation Manual

Page: 26 / 32

22 en | Installing the IntuiKey Keyboard IntuiKey Keyboard
F.01U.115.018 | 1.92 | 2008.12 Installation Manual Bosch Security Systems, Inc.
Keyboard Test Displays a keyboard test screen on the softkey display. Press
ENTER to exit the keyboard test mode. As each key is pressed, an
indicator displays on the screen. If the joystick is moved, its
present variable speed value is displayed. Pan and Tilt ranges
from 0 to 15; Zoom ranges from 0 to 7.
LCD Test Different patterns are displayed on the softkey display, and the
alarm LED flashes. Each pattern displays for approximately two
(2) seconds.
Joystick Autocal Auto-calibrates the joystick (allow the joystick to self-center, then
press ENTER). The softkey display then indicates New Values
Saved.
Not Used
Firmware Upgrade
Places the keyboard into a password-protected mode that allows
upgrade of the internal software via serial connection to a host
computer. See Appendix C for details on entering passwords.
Allegiant Baud This field displays the current baud rate of the keyboard’s
Allegiant port. This setting is detected automatically and can not
be changed.
Contrast Adjust Displays the Contrast Adjust menu, which provides two
adjustment scales: one for the Softkey display and the other for
the status display. Control each adjustment scale with the
adjacent softkey buttons (as indicated by the arrows in the
menu). Generally, the buttons to the right of each scale decrease
the contrast (make the display lighter), while the buttons to the
left increase the contrast (make the display darker). The indicator
on the scale is incremented (moved) one step for each press of
the softkey. The indicator wraps around when either limit is
reached. When the desired contrast level is reached, press Enter
to exit the submenu and store the values. Press CLR at any time
to reset the contrast to the presently stored value. Pressing
MON+CLR (simultaneously at any time while using the keyboard)
resets the contrast to the center position of the scale.
NOTE: It is possible to adjust the contrast to a level where the
text cannot be seen. If this happens, simply continue pressing the
softkey until the text reappears OR press CLR to restore the
display to the presently stored values.
Key Click On/Off Toggles between audible sound at each key click and no sound at
each click. Upon pressing the key, the softkey descriptor
indicates whether key click is on or off.
Display Inverse Toggles the display between black-on-white display or white-on-
black display. Upon pressing the key, the softkey descriptor
indicates whether Display Inverse is on or off.