Icon Overview
*All Areas are ARMED
*Some Areas are ARMED
*All Areas are DISARMED
Reset latched day alarm output
Note: These * 3 arming icons apply only to partitioned systems.
Arming the security system
1. Touch “Disarmed” icon
2. Touch Arming mode icon
3. PIN + ENTER
Disarming the security system
-
PIN + ENTER
Settings Menu
Touch
=
Menu Description
( Some menu items may not appear depending on installer setup )
1.
User Codes
=
Add, delete or change a users PIN
2.
Radio Keyfobs
=
Add or delete a remote control
3.
Date/Time
=
Change the date and time setting in the alarm panel
4.
Dialling
=
Check, add or change telephone numbers called.
5.
Diagnostics
=
Check system history and test sirens, zones etc
6.
Isolate Zones
=
Turn off selected zones for one arming period
7.
Day Alarm on/off
=
refer to day alarm in your
panel’s user manual
8.
Control Outputs
=
refer to Control Outputs in your panel’s user manual
9.
Reset Outputs
=
refer to Control Outputs in your panel’s user manual
10.
Names
=
Add or change names for zones, users and outputs
Menu Description
11.
Touchpad
=
Alter settings such as sound and brightness.
12.
Installation
=
Access to installation settings ( installer use only )
Add, Change or Delete a User Code
Touch
Select “ User Codes “ from the menu
Enter a master code
Select User to add or change
Enter new code
To delete touch bin icon
Isolate a Zone
Touch
Select “ Isolate Zones “ from the menu
Touch the “NO” button to change state
Touch
to return to home screen . The zone status icon will now switch to white
in colour. Isolation is for one arming period only.
Names
Zones and user codes can have custom names assigned via this option.
Touch
Select “Names” from the menu then “Zones” or “Users.”
Touch to modify name Touch to select
Name Editing
Touch to delete name
predefined names
The above method applies to user names also.