background image

Environmental protection and saving energy

 en

5

Safely dispose of empty or defective batteries in an
environmentally friendly manner.

There is a risk of surface damage if you do not peel off
the protective film.

Remove the protective film from all parts of the ap-
pliance before using for the first time.

3  Environmental protection and saving energy

Help protect the environment by using your appliance
in a way that conserves resources and by disposing of
reusable materials properly.

3.1 Disposing of packaging

The packaging materials are environmentally compat-
ible and can be recycled.

Sort the individual components by type and dispose
of them separately.
Information about current disposal methods are
available from your specialist dealer or local author-
ity.

3.2 Saving energy

If you follow these instructions, your appliance will use
less power.
Ensure that there is sufficient ventilation when cook-
ing.

¡

The appliance works more efficiently and with fewer
operating noises.

Adjust the fan speed to the amount of steam pro-
duced during cooking.

¡

The lower the fan speed, the less energy is con-
sumed.
Only use intensive mode when required.

If cooking produces large amounts of steam, select a
higher fan speed in good time.

¡

The odours are distributed around the room less.

Switch the appliance off when you are not using it.

¡

The appliance does not consume any energy.

Switch off the lighting if you no longer require it.

¡

The lighting does not consume any energy.

Clean or replace the filters at regular intervals.

¡

The effectiveness of the filter is retained.

Put the cooking lid on.

¡

The cooking vapours and condensation are re-
duced.

4  Operating modes

You can use your appliance in air extraction mode or
circulating-air mode.
The saturation indicator must be adjusted to the selec-
ted operating mode and the filters used. 

→ 

Page 7

4.1 Air extraction mode

The air which is drawn in is cleaned by the grease fil-
ters and conveyed to the exterior by a pipe system.

The air must not be discharged into a
flue that is used for exhausting fumes
from appliances burning gas or other
fuels (not applicable to appliances that
only discharge the air back into the
room).

¡

If the exhaust air is to be conveyed
into a non-functioning smoke or ex-
haust gas flue, you must obtain the
consent of the heating engineer re-
sponsible.

¡

If the exhaust air is conveyed
through the external wall, a tele-
scopic duct should be used.

4.2 Air recirculation mode

The air which is drawn in is cleaned by the grease fil-
ters and an odour filter, and conveyed back into the
room.

To bind odours in circulating-air mode,
you must install an odour filter. The dif-
ferent options for operating the appli-
ance in circulating-air mode can be
found in our catalogue. Alternatively,
ask your dealer. The required accessor-
ies are available from specialist retail-
ers, from customer service or from the
Online Shop.

Summary of Contents for I95CAQ6.0

























Reviews: