8
Follow all valid standards and laws.
Ensure that the electrical connection meets the
requirements of the latest version of all applicable
standards and laws in the appropriate country, especially
the following standards: National Electrical Code, ANSI/
NFPA 70, or CSA Standards C22.1-94, Canadian
Electrical Code, Part 1 and C22.2 No.0-M91.
Have a qualified electrical technician check the
grounding of the appliance.
Do not ground with a gas line.
No fuse protection in the neutral or grounding circuit.
Keep the installation instructions. Only connect the
appliance with a copper conductor. If possible, connect
the appliance to a metal cable guide directly to the fuse
box.
Ensure that the wire diameter meets the requirements of
the latest version of all applicable standards and laws in
the appropriate country, especially the following
standards: National Electrical Code, ANSI/NFPA 70, or
CSA Standards C22.1-94, Canadian Electrical Code, Part
1 and C22.2 No.0-M91.
Put a protecting hose that is listed in the U.L. or C.S.A. on
both ends of the connecting cable, that is, on the
appliance and on the fuse box.
Before you begin
Tools and parts needed
▯
Saber Saw or Jig Saw
▯
Drill
▯
1
1
/
4
" Wood Drill Bit
▯
Pliers
▯
Phillips Screwdriver
▯
Wire Stripper or Utility Knife
▯
Metal Snips
▯
Measuring Tape or Ruler
▯
Level
▯
Pencil
▯
Caulking Gun
▯
Duct Tape
Parts included
Appliance dimensions
Safety clearances
9
WARNING
RISK OF FIRE
Grease deposits in the grease filter can catch fire.
The given safety clearance must be observed to
avoid heat buildup. Observe the specifications for
your cooking appliance. If gas and electric cooktops
are used together, the largest given clearance
applies.
The appliance may only be installed directly next to
a cabinet or wall on one side. The wall or cabinet
clearance must be at least 2" (50 mm).
ૅ
PP
PP
ૅૅ
PP
PP
ਲ¼ਿ
PP
Summary of Contents for HUI50351UC
Page 1: ...Installation Manual Hood HUI50351UC HUI56551UC ...
Page 47: ......
