Bosch HSG737356Z, Instruction Manual

Page: 12 / 20

12
Removing the rotary spit
:
Risk of burns!
Never touch the hot surfaces of the cooking compartment or
the heating elements. Children must be kept at a safe distance
from the appliance at all times. Open the appliance door
carefully. Hot steam may escape.
:
Risk of burns!
Never touch the rotary spit or other accessories directly when
they are hot. Always wear oven gloves or heat-resistant gloves
when handling hot accessories.
1.
Open the appliance door carefully.
2.
Using the metal hook, pull the rotary spit to the right out of
the motor mount.
3.
Pull the rotary spit shelf halfway out of the oven.
4.
Hold the rotary spit in place on the left-hand side with an oven
glove and screw the handle onto the rotary spit.
5.
Lift the rotary spit carefully out of the rotary spit shelf.
6.
Remove the rotary spit shelf and the baking tray from the
oven.
Operating the electronic clock
Setting the time
After the appliance has been connected to the mains for the
first time or after a power cut, three zeros flash in the display.
1.
Press the 0 button.
2.
Set the current time with the "+" and "-" buttons.
After 7 seconds, the time setting is adopted.
Note:
To change the set time, press the "+" and "-" buttons and
set the current time with the "+" and "-" buttons.
Setting the timer
The timer has no influence on the functions of the oven. The
duration of the timer can be set to between 1 minute and 23
hours and 59 minutes.
1.
Press the " 0 " button.
The V symbol flashes in the display panel and three zeros
are displayed.
2.
Set the required cooking time with the "+" and "-" buttons.
A signal sounds once the time has elapsed.
Notes
■
To change the set cooking time, select the timer with the
0
button and set the cooking time using the "+" and "-" buttons.
■
To cancel the settings, select the timer with the
0
button and
press the "+" and "-" buttons simultaneously.
Switching off the acoustic signal
Press the "-" button to switch off the acoustic signal.
After seven minutes, the signal switches off automatically.
Changing the audible signal
Three different audible signals are available.
1.
Press the "+" and "-" buttons simultaneously.
2.
Press the
0
button.
The current audible signal is shown in the display panel, e.g.
"Tone 1".
3.
Press the "-" button to select a different audible signal.
Care and cleaning
With good care and cleaning, your oven will remain clean and
fully-functioning for a long time to come. Here we will explain
how to maintain and clean your oven correctly.
Notes
■
Slight differences in the colours on the front of the oven are
caused by the use of different materials, such as glass,
plastic and metal.
■
Shadows on the door panel which look like streaks, are
caused by reflections made by the oven light.
■
Enamel is baked on at very high temperatures. This can
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
:
Risk of electric shock!
Do not use any high-pressure cleaners or steam cleaners,
which can result in an electric shock.
:
Risk of burns!
The appliance becomes very hot. Never touch the interior
surfaces of the cooking compartment or the heating elements.
Always allow the appliance to cool down. Keep children at a
safe distance.