11
Before using the appliance for the first time
▯
Appliance must be properly installed by a qualified
technician before use.
▯
Remove all packing materials from inside and outside
the oven.
▯
While cool, wipe with a clean, damp cloth and dry.
▯
There may be a slight odor from your new appliance;
this is normal and will disappear after a short time.
▯
Optimum cooking results depend on proper cookware
being used.
▯
Read and understand all safety precautions and Use
and Care Manual information.
Execute the following sections prior to operating:
The appliance must be completely fitted and connected.
Cleaning accessories
Before using accessories for the first time, thoroughly
clean them with hot soapy water and a soft dish cloth.
Operation
Setting the clock
The clock can be set in 12-hour mode.
1.
Touch
Clock
once.
2.
Enter the time using the number keys.
Example: To set the clock to 12:41 type in 1 2 4 1.
3.
Touch
Clock
to confirm.
The time of day is displayed.
Setting the Timer
The Timer feature can be used as a kitchen timer. The
maximum timer value is 99:99 (minutes : seconds).
1.
Touch
Timer
once.
2.
Enter the desired time using the number keys.
3.
Touch
Timer
to confirm.
The Timer starts counting down.
Once the set time has elapsed,
‹
:
‹‹
appears in the
display and an intermittent beep indicating that the timer
has run out.
To stop the beep, touch
Timer
.
Operating the Ventilation Fan
The Vent feature moves steam and other cooking vapors
from the cooking surface of the range below the
microwave oven.
1.
Touch
Vent (high/low)
once. The ventilation symbol
¾
lights up on the display and the fan operates at
the highest setting.
2.
Touch
Vent (high/low)
again to choose the low speed
setting and a third time to turn the ventilation fan off.
Note:
If the temperature gets too hot around the
microwave oven, the fan of the vent feature will
automatically turn on at the lowest setting to cool the
oven. The fan will automatically turn off when the internal
parts are cool. When this occurs, the vent cannot be
turned off.
Turning the Light on/off
Touch
Light
once to turn on a cooking surface light.
Touch the key again to turn the light off.
Operating the microwave
The appliance must be turned off.
1.
Enter the desired cooking duration with the number
keys. The timer display will fill in from right to left.
Example: To set a microwave cooking time of
20 minutes and 30 seconds, enter the numbers
2 0 3 0. START is blinking.
2.
You can start microwave operation with the default
power level 10 by touching
Start/Enter
,
or -
you can adjust the power level. Touch
Power Level
.
The default power level
˜–‚‹
is blinking. The
segments in the bar underneath the number display
also indicate the power level.
3.
Enter the desired power level using the number keys.
˜–
and the selected power level and START are
blinking in the display.
4.
Touch
Start/Enter
to start microwave operation.
The microwave timer will start to count down.
The microwave timer can be changed during operation
by touching
+30 Seconds
.
The power level can be changed during operation. To
display the set power level, touch
Power Level
.
