Bosch HGJ9A8Q50I, Instruction Manual

Page: 14 / 24

en
Before using for the first time
14
K
Before using for the first
time
Before using for the first time
In this section, you can find out what you must do
before using your oven or hob to prepare food for the
first time. Read the following section beforehand.
~
"Important safety information" on page 5
Remove the appliance packaging and dispose of it
appropriately.
Baking out the oven
Precleaning the oven
1.
Remove accessories and hook-in racks from the
cooking compartment.
2.
Fully remove any remaining packaging, such as
small pieces of polystyrene, from the cooking
compartment.
3.
Some parts are covered with a protective film.
Remove the protective film.
4.
Clean the outside of the appliance with a soft, damp
cloth.
5.
Clean the cooking compartment with hot soapy
water.
Heating up the oven
To remove the new cooker smell, heat up the oven
when it is empty and closed.
1.
Turn the temperature selector to the maximum
temperature.
2.
Switch off the oven after 45 minutes.
Cleaning the burner caps and cups
1.
Clean the burner caps (A) and cups (B) with water
and washing-up liquid.
2.
Dry the parts well.
3.
Place the burner cup (B) onto the burner (C).
4.
Position the burner cap (A) exactly on the burner
cup (B).
Cleaning the accessories
Before using the accessories, clean them thoroughly
using a cloth and warm soapy water.
1
Operating the appliance
Operating the appliance
You have already learnt about the controls and how
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Hob
Switching on the gas burner
Notes
■
Appliances with a hob cover must only be switched
on if the hob cover is open.
■
The burner caps must always be positioned exactly
on top of the burner cups. The slots on the burner
cup must be free from obstruction. All parts must be
dry.
■
Ensure that the burner is not subjected to draughts
caused by air conditioning systems, fans or similar
appliances.
1.
Press the control knob for the required burner and
turn it to the — position.
The gas burner ignites.
2.
Keep the control knob pressed for a few seconds
until the flame stabilises.
3.
Set the desired flame setting.
The flame is not stable between positions Û and — .
Always select a position between — and ˜ .
If the flame goes out
Switch off the control knob. Wait one minute and switch
the burner on again.
:
Warning – Risk of fire!
If the flame goes out, gas will escape. Never leave the
gas burner unattended during operation. Ensure that
there are no draughts.
If the gas burner does not ignite
In the event of a power cut or damp ignition plugs, light
the gas burner with a gas lighter or a match.
Switching off the gas burner
Turn the control knob for the required hotplate to
position Û .
$
%
&
Setting Meaning
˜
Economy flame, lowest power
—
Large flame, highest power