background image

Appliance door

 en

21

14  Appliance door

It is normally sufficient if you clean the outside of the
appliance door. If the appliance door is very dirty on
the inside and outside, you can remove the appliance
door and clean it.

14.1 Door hinges

WARNING ‒ Risk of injury!

When the hinges are not secured, they can snap shut
with great force.

If you open the appliance door, ensure that the lock-
ing levers are fully open or fully closed.

1.

The oven door hinges each have a locking lever.
When the locking levers are closed, the oven door
is secured in place.

It cannot be detached.

2.

When the locking levers are open in order to detach
the oven door, the hinges are secured.

The hinges cannot snap shut.

14.2 Removing the appliance door

1.

Open the oven door fully.

2.

Open the locking levers on the left- and right-hand
hinges.

3.

Close the oven door as far as the limit stop. Grip
the left and right hand sides of the door with both
hands. Close the door slightly more and remove it.

14.3 Attaching the appliance door

Reattach the oven door in the reverse sequence to re-
moval.

WARNING ‒ Risk of injury!

The oven door might accidentally fall or a hinge may
suddenly snap shut.

In this case, do not hold onto the hinge. Call cus-
tomer service.

1.

When attaching the oven door, ensure that both
hinges are inserted in the opening direction.

Summary of Contents for HG.120B.0Q









































Reviews: