11
Changing the basic settings
This oven has different basic settings. The settings can be
adapted to the user's own needs.
No other time function can be programmed.
1.
Press the
0
button for approximately 4 seconds.
The display panel will show the current basic setting for the
time, e.g.
™‚
for the Selection
‚
.
2.
Set the basic setting using the buttons
@
or
A
.
3.
Confirm with the
0
button.
The display panel shows the following basic setting. Using
the button
0
select the levels and using the buttons
@
or
A
make the setting.
4.
Press the
0
button for approximately 4 seconds.
All basic settings have been applied.
The basic settings can be changed again at any time.
Care and cleaning
With good care and cleaning, your oven will remain clean and
fully-functioning for a long time to come. Here we will explain
how to maintain and clean your oven correctly.
Notes
■
Slight differences in the colours on the front of the oven are
caused by the use of different materials, such as glass,
plastic and metal.
■
Shadows on the door panel which look like streaks, are
caused by reflections made by the oven light.
■
Enamel is baked on at very high temperatures. This can
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
Cleaning agents
Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
When cleaning the oven do not use
■
sharp or abrasive cleaning agents,
■
cleaning agent with a high alcohol content,
■
scouring pads,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
Wash new sponges thoroughly before first use.
Basic settings
Selection
‚
Selection
ƒ
Selection
„
™‚
Time indicator
always*
only with
the
button
0
-
™ƒ
Duration of signal
after the cooking
time or the time set
on the timer has
elapsed
approx.
10 sec
approx.
2 min.*
approx.
5 min
™„
Time until a setting is
applied
approx.
2 sec
approx.
5 sec.*
approx.
10 sec.
* Default setting
Control panel
Hot soapy water:
Clean with a dish cloth and dry with a soft
cloth. Do not use glass cleaner or glass
scrapers for cleaning.
Stainless-steel
surfaces
Clean with warm soapy water and a soft cloth.
On stainless-steel surfaces, always wipe par-
allel to the natural grain. Otherwise, you may
scratch the surface. Dry with a soft cloth.
Remove flecks of limescale, grease, starch
and albumin (e.g. egg white) immediately. Do
not use any abrasive materials, scouring
sponges or rough cleaning cloths. Polish the
stainless steel fronts using special care prod-
ucts. Observe the manufacturer's instruc-
tions. Special stainless-steel cleaning agents
are available from the after-sales service or
from specialist retailers.
Enamel sur-
faces and lac-
quered
surfaces
Wipe with warm soapy water and a cloth. Dry
with a soft cloth.
Rotary knobs
Wipe with warm soapy water and a cloth. Dry
with a soft cloth.
Glass panel
Clean using glass cleaner. Do not use any
abrasive cleaning agents or sharp metal
objects. These may scratch and damage the
surface of the glass panel.
Seal
Wipe with a warm, damp cloth. Dry with a soft
cloth.
Oven floor,
ceiling and
side panels
Warm soapy water or a vinegar solution. If
there are heavy deposits of dirt, only use oven
cleaner on cooled surfaces. Never apply to
the back panel.
Glass cover
for the oven
light
Wipe with warm soapy water and a cloth. Dry
with a soft cloth.
Equipment
Soak in warm soapy water. Clean with a brush
or sponge.
