Bosch HBC34D.54., Instruction Manual

Page: 10 / 32

10
The brackets are around
p
(End time). The time when the
dish will be ready is displayed.
4.
Use the @ button to delay the end time.
5.
Press the
n
button.
The appliance switches to standby. The [ p ] end time is
shown in the display. Cooking starts at the right time. The
cooking time starts counting down in the display.
Changing the end time
Use the @ or A button to change the end time. If the timer has
been set, first press the 0 button repeatedly until the [ p ] end
time appears.
After a few seconds, the change is adopted. Do not change the
end time if the cooking time has already started to elapse. The
cooking result would no longer be correct.
The cooking time has elapsed
An audible signal sounds. The appliance stops heating. Press
the
0
button to stop the audible signal. To switch off the
appliance, turn the operating mode and temperature selectors
back to the
Û
position. Open the appliance door carefully. Hot
steam will escape.
Cancelling the end time
Use the
A
button to set the end time back to the current time. If
the timer has been set, first press the 0 button repeatedly until
the [
r
] cooking time appears.
After a few seconds, the change is adopted. The selected
cooking time starts counting down straight away.
Setting the clock
Example: changing from summer to winter time.
No other time-setting function should be set.
1.
Press the
0
repeatedly until the [
0
] Clock symbol appears.
2.
Use the @ or A button to set the clock.
After a few seconds, the time which has been set is adopted.
After a power cut
After a power cut, the
0
and
‹‹
:
‹‹
symbols light up in the
display. Press the
0
button. Use the
@
or
A
button to set the
clock. After a few seconds, the time which has been set is
adopted.
Hiding the clock
You can hide the clock. It is then only visible when the
appliance is in operation (see section: Basic settings).
Automatic programmes
You can prepare food really easily with 40 different
programmes.
In this section, you will find out
■
how to set one of the automatic programmes
■
hints and tips on the programmes
■
which programmes you can set
Setting a programme
Select the appropriate programme from the programme table.
Follow the instructions for the programmes.
1.
Turn the operating mode selector to
`
.
The first programme
˜ ‚
appears in the display.
2.
Use the @ or A button to set the programme.
3.
Press the f button.
A default weight appears in the display.
For some programmes, you do not have to enter a weight. If
this is the case, ‹ : ‹‹ kg appears.
4.
Use the
@
or
A
button to set the weight of the food.
5.
Press the n button.
The programme cooking time counts down in the display.
Setting a later end time
You can delay the end time for some programmes. The
programme will be started later and finish at the desired time
(see Section: Time-setting options).
Cancelling the programme
Turn the operating mode selector back to
Û
.
End of the programme
An audible signal sounds. Cooking has finished. To switch off
the appliance, turn the operating mode selector back to
Û
.
ã=
Risk of scalding!
Hot steam may escape when the appliance door is opened.
Open the appliance door carefully during or after cooking.
When opening the door, do not lean over it. Ensure that,
depending on the temperature, steam is not visible.