Bosch GTS 10 XC Professional, Original Instructions Manual

Page: 39 / 526

English | 39
Table saw GTS 10 XC GTS 10 XC GTS 10 XC
Hole diameter mm 30 30 30
Table saw GTS 10 XC GTS 10 XC
Article number 3 601 M30 442 3 601 M30 4B2
Rated power input W − 2100
Rated current A 9.1 −
Rated voltage V 220−240 220
Frequency Hz 50/60 60
No-load speed min
-1
3200 3200
Starting current limitation ● ●
Run-out brake ● ●
Overload protection ● ●
Weight according to EPTA-Procedure
01:2014 kg 35.0 35.0
Protection class
/ II / II
Dimensions (including detachable parts of the tool)
Width x depth x height mm 810 x 768 x 343 810 x 768 x 343
Dimensions of suitable saw blades
Saw blade diameter mm 254 254
Base blade thickness mm <2.2 <2.2
Min. tooth thickness/offset mm >2.4 >2.4
Hole diameter mm 25.4 25.4
Maximum workpiece dimensions: (see "Maximum workpiece dimensions", page 44)
Noise information
Noise emission values determined according to EN
62841-3-1 .
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
92 dB(A); sound power level
105 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
The noise emission value given in these instructions has
been measured in accordance with a standardised measur-
ing procedure and may be used to compare power tools. It
may also be used for a preliminary estimation of noise emis-
sions.
The noise emission value given represents the main applica-
tions of the power tool. However, if the power tool is used
for other applications, with different application tools or is
poorly maintained, the noise emission value may differ. This
may significantly increase noise emissions over the total
working period.
To estimate noise emissions accurately, the times when the
tool is switched off, or when it is running but not actually be-
ing used, should also be taken into account. This may signi-
ficantly reduce noise emissions over the total working
period.
Assembly
u
Avoid starting the power tool unintentionally. The
mains plug must not be connected to the power supply
during assembly or when carrying out any kind of
work on the power tool.
Items included
Check to ensure that all the parts listed below have been
supplied before using the power tool for the first time:
– Table saw with fitted saw blade
(33) and riving knife (7)
– Angle guide (3)
– Profile rail (34)
– "Profile rail" fastening set (55) (guide plate, knurled nut,
screw, washer)
– Parallel guide (8)
– Additional parallel guide (52)
– "Additional parallel guide" fastening set (39) (3 fastening
screws, 3 washers, 3 wing nuts)
– Protective cover (6)
– Table extension (10)
– "Table extension" fastening set (43) (2 fastening screws,
2 washers, 1 open-ended spanner)
– Hex key (37)
– Ring spanner (15)
– Saw blade storage compartment cover (14)
Bosch Power Tools 1 609 92A 5B8 | (15.07.2019)