12
| English
The animation shows the detailed procedure for the selec-
ted measuring function.
Press the
button to stop the animation or to continue
the animation.
Press the
button or the
button to display the next or
the previous step.
Length Measurement
Press the
button to open the
Functions
menu.
Select the length measurement
and confirm the selec-
tion with the
button.
Briefly press the
button to switch on the laser.
Press the
button to start the measurement.
The measured value is displayed in the result line
(a)
at the
bottom of the display.
Repeat the above-mentioned steps for each subsequent
measurement.
09.08.2021
13:20
0.0º
23.198 m
m
9.279
m
13.919
m
18.558
m
4.640
(a)
(h)
If several length measurements are
taken in a row, the results of the last
measurements are displayed in the
measured value lines
(h)
. The last meas-
ured value is at the bottom of the dis-
play, the penultimate measured value is
above it, and so on.
Area Measurement
Press the
button to open the
Functions
menu.
Select area measurement
and confirm the selection
with the
button.
Briefly press the
button to switch on the laser.
Press the
button to start the first measurement, e.g. the
length of a room.
Press the
button to start the second measurement, e.g.
the width of a room.
09.08.2021
13:20
0.0º
43.050 m
2
m
4.640
m
9.279
(a)
(h)
After the second measurement has
been completed, the area will be auto-
matically calculated and displayed. The
result is displayed in the result line
(a)
.
The individual measured values are in
the measured value lines
(h)
.
Continuous Measurement
During continuous measurement, the measured value is con-
tinually updated. You can, for example, move a required dis-
tance away from a wall while reading off the current distance at
all times.
Press the
button to open the
Functions
menu.
Select continuous measurement
and confirm the selec-
tion with the
button.
Briefly press the
button to switch on the laser.
Move the measuring tool until the required distance is dis-
played in the result line.
You can interrupt the continuous measurement by briefly
pressing the
button.
Press the
button again to continue the continuous
measurement.
09.08.2021
13:20
0.0º
max
min
m
m
1.291
m
11.623
11.623
(a)
(h)
The current measured value is displayed
in the result line
(a)
, and the maximum
and the minimum measured value in the
measured value lines
(h)
.
Continuous measurement switches off automatically
after
5
min.
Volume Measurement
Press the
button to open the
Functions
menu.
Select volume measurement
and confirm the selection
with the
button.
Briefly press the
button to switch on the laser.
Press the
button to start the first measurement, e.g. the
length of a room.
Press the
button to start the second measurement, e.g.
the width of a room.
Press the
button to start the third measurement, e.g.
the height of a room.
09.08.2021
13:20
0.0º
m
4.640
m
9.279
m
13.919
599.276 m
3
(a)
(h)
After the third measurement has been
completed, the volume will be automat-
ically calculated and displayed. The res-
ult is displayed in the result line
(a)
. The
individual measured values are in the
measured value lines
(h)
.
Indirect distance measurement
Indirect distance measurement is used to measure distances
that cannot be measured directly because an obstacle would
obstruct the laser beam or no target surface is available as a re-
flector. This measuring procedure can only be used in a vertical
1 609 92A 7P4 | (22.07.2022)
Bosch Power Tools
